[Asterisk-Users] DG104S firmware has error?
Pavel Litvinenko
litw at krypton.ru
Sat Jan 24 15:46:37 MST 2004
Zot O'Connor wrote:
>I am installing a used DG104S....
>
>I got it to ring from gnophone, but all I got was fast busies. so I
>upgraded based on Pavel's link:
>
>
>
>ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip
>
>So I now have:
>
>
> PROM Version: 3.0B22-D RUNTIME Version: 3.0B44-D
>
>
>But when I pick the phone up I get:
>ggdbg>000001604 DIM: 0 DSP ERROR: Reason= DIM ERROR: State Timeout
>000001604 DIM: 0:*, State Timeout Error (State = WAIT_RESTART_IND)
>000001604 DIM: 0:*, BRINGING DSP DOWN !!
>000001604 DSP 0 Failure. Error: -1
>000001604 CCU: 0, DSP Failure. State: 2
>000001604 xGCP: ERROR 0X105 in .\src\ggxgcpif.c at line 3761 (coding
>err)
>
>000001604 CCU: 0, Coding now (officially) free
>000001604 tcid 0. NO DSP RESOURCES
>000001604 xgcpimh: CA message rejected
>
>Is there another setting I have that is causing this? I did a factory
>reset.
>
>I then downgraded to
>dg104S_runtime_b35.bin
>
>
>
upload your old prom version too ...
What hardware version is on your dg104s ?
>But it would not keep the changes to the CA string, either via the web
>or console...
>
>Any ideas?
>
>Thanks!
>
>
>
More information about the asterisk-users
mailing list