[Asterisk-Users] DG104S firmware has error?

[Zot O'Connor]

I am installing a used DG104S....

I got it to ring from gnophone, but all I got was fast busies.  so I
upgraded based on Pavel's link:



ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip

So I now have:


    PROM Version: 3.0B22-D    RUNTIME Version: 3.0B44-D


But when I pick the phone up I get:
ggdbg>000001604 DIM: 0 DSP ERROR: Reason= DIM ERROR: State Timeout 
000001604 DIM: 0:*, State Timeout Error (State = WAIT_RESTART_IND)
000001604 DIM: 0:*, BRINGING DSP DOWN !!
000001604 DSP 0 Failure. Error: -1
000001604 CCU: 0, DSP Failure. State: 2
000001604 xGCP: ERROR 0X105 in .\src\ggxgcpif.c at line 3761 (coding
err)

000001604 CCU: 0, Coding now (officially) free
000001604 tcid 0. NO DSP RESOURCES
000001604 xgcpimh: CA message rejected

Is there another setting I have that is causing this?  I did a factory
reset.

I then downgraded to
dg104S_runtime_b35.bin

But it would not keep the changes to the CA string, either via the web
or console...

Any ideas?

Thanks!

-- 
Zot O'Connor <zot at zotconsulting.com>
White Knight Hackers, Inc.