[Asterisk-Users] Get new PRI working

[Adam Goryachev]

asterisk-users-admin at lists.digium.com <> wrote:
> Hi all,
> 
> I received my shiny new TE405P on Friday, and after much fiddling and
> assistance from the irc channel, I got a OK status (telco
> reversed the TX/RX
> and I wired it wrong).
> 
> Anyway, currently it works for inbound calls, but I can't
> seem to dialout on

OK, I found the basic problem... It seems to be that I wasn't dialling
the correct number. I was dialling either 8 digits (93454395) or else 10
digits (0293454395) which are the usual conventions for Australia.

What I was finally told (by coppice on IRC, thank you, he helped me all
the way from diagnosing the original wiring problems through to the
current mostly working situation) is that I should drop the 0, so
293454395 worked perfectly for dialling local numbers, and other 10
digit numbers work if I drop the leading 0.

However, I still can't dial any mobiles (all mobiles are 10 digit like
0402 xxx xxx) which I thought would have been the same as the above
local/std calls.

Also, I can't dial freecall numbers (1800 xxx xxx) etc.

If anyone has any hints on possible number formats for calling these
sorts of numbers, I would appreciate it.

Of course, if I eventually work it out, I will post back to the list for
the sake of those people who do search/read the archives...

Regards,
Adam

 --
Adam Goryachev
Website Managers
Ph:  +61 2 9345 4395                        adam at websitemanagers.com.au
Fax: +61 2 9345 4396                        www.websitemanagers.com.au