[Asterisk-Users] BT-100 Transfer!!

[Mark Willis]

That works for me too, just not obvious. Pity Conference doesn't work the same
way.

And 1.0.5.18 fixed the Message button, thanks to those who suggested the
location.

Mark
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bob Goddard
Sent: Friday, December 10, 2004 08:10
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] BT-100 Transfer!!

On Friday 10 December 2004 13:53, Greg - Cirelle Enterprises wrote:
> At 07:05 AM 12/10/04, you wrote:
> >greg wrote:
> >>Transfer feature is not enabled in 1.0.5.18 for asterisk, it is for
> >> Nortel
> >
> >Diego Aguirre wrote:
> >I use atendent transfer in Asterisk!!!
>
> ok, the # extension key combo
>
> too bad the 3 buttons cannot be programmed to emulate
> the functions to make it work. i.e. the transfer button
> to send the key code of the # key, etc... same with
> conference and flash.

It does work.

Make sure on configuration page, you set "send flash event" to be NO, then
pressing flash will not send any dtmf signal, but try to open another
session.

A talk to B,
B press flash and hear dial tone,
B dial C an talk to C.
B press transfer to let A talk to C. then B hangs up.


B
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users