[Asterisk-Users] BT-100 Transfer!!

[Bob Goddard]

On Friday 10 December 2004 14:42, Greg - Cirelle Enterprises wrote:
> At 09:09 AM 12/10/04, you wrote:
> >On Friday 10 December 2004 13:53, Greg - Cirelle Enterprises wrote:
> > > At 07:05 AM 12/10/04, you wrote:
> > > >greg wrote:
> > > >>Transfer feature is not enabled in 1.0.5.18 for asterisk, it is for
> > > >> Nortel
> > > >
> > > >Diego Aguirre wrote:
> > > >I use atendent transfer in Asterisk!!!
> > >
> > > ok, the # extension key combo
> > >
> > > too bad the 3 buttons cannot be programmed to emulate
> > > the functions to make it work. i.e. the transfer button
> > > to send the key code of the # key, etc... same with
> > > conference and flash.
> >
> >It does work.
> >
> >Make sure on configuration page, you set "send flash event" to be NO, then
> >pressing flash will not send any dtmf signal, but try to open another
> >session.
> >
> >A talk to B,
> >B press flash and hear dial tone,
> >B dial C an talk to C.
> >B press transfer to let A talk to C. then B hangs up.
> >
> >
> >B
>
> That worked!
>
> How did you determine that sequence?

I did what everyone should do in the first place, ask the manufacturers.
I find Grandstream very accommodating.


B