[Asterisk-Users] BT-100 Transfer!!

[Bob Goddard]

On Friday 10 December 2004 13:53, Greg - Cirelle Enterprises wrote:
> At 07:05 AM 12/10/04, you wrote:
> >greg wrote:
> >>Transfer feature is not enabled in 1.0.5.18 for asterisk, it is for
> >> Nortel
> >
> >Diego Aguirre wrote:
> >I use atendent transfer in Asterisk!!!
>
> ok, the # extension key combo
>
> too bad the 3 buttons cannot be programmed to emulate
> the functions to make it work. i.e. the transfer button
> to send the key code of the # key, etc... same with
> conference and flash.

It does work.

Make sure on configuration page, you set "send flash event" to be NO, then
pressing flash will not send any dtmf signal, but try to open another
session.

A talk to B,
B press flash and hear dial tone,
B dial C an talk to C.
B press transfer to let A talk to C. then B hangs up.


B