[Asterisk-Users] ATA 188 and fax

[Ryan Thrash]

On a Grandstream ATA and CVS HEAD from last night, and with echo off, 
I'm able to receive faxes. With echo on, no go.

HTH,
Ryan

On Apr 15, 2004, at 1:58 PM, Ariel Batista wrote:

> Osvaldo Mundim wrote:
>> Hi,
>>
>> Does anybody have ATA 188 working with any kind of fax machine? I've
>> tried many different configuration following the Cisco Online Manual
>> and I couldn't get this working with Asterisk.
>
> I don't know what the difference is between the 186 and 188 other then 
> the
> extra nic port.  But we gave up on the 186 for doing any fax or data 
> calls.
> We switched to Sipura-2000 and using Ulaw faxing works.  Data calls 
> well we
> can get them working but only at 28,800 bps.
>
> Good luck
>
>
>>
>> I were trying do change the ATA Connect Mode and Audio Mode reading
>> the (http://www.cisco.com/en/US/products/hw/gatecont/ps514/
>> products_configuration_example09186a00800d698e.shtml) and allowing all
>> codecs on Asterisk and did not work either.
>>
>> best regards
>> Oz
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>