[Asterisk-Users] ATA 188 and fax

[Ariel Batista]

Osvaldo Mundim wrote:
> Hi,
>
> Does anybody have ATA 188 working with any kind of fax machine? I've
> tried many different configuration following the Cisco Online Manual
> and I couldn't get this working with Asterisk.

I don't know what the difference is between the 186 and 188 other then the
extra nic port.  But we gave up on the 186 for doing any fax or data calls.
We switched to Sipura-2000 and using Ulaw faxing works.  Data calls well we
can get them working but only at 28,800 bps.

Good luck


>
> I were trying do change the ATA Connect Mode and Audio Mode reading
> the (http://www.cisco.com/en/US/products/hw/gatecont/ps514/
> products_configuration_example09186a00800d698e.shtml) and allowing all
> codecs on Asterisk and did not work either.
>
> best regards
> Oz
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users