[Asterisk-Users] ATA-186 Double Digit problems

[Bob Knight]

I can't afford Cisco phones, but I'll tell ya what I see with GS phones.
They seem to be bouncy as hell.
I'll hit a key and see 4 - 6 rtp dtmf event messages.
I am going to try and just debounce this in * and see what happens.


John Todd wrote:

>
> Hello -
>    I'm using ATA-186 devices, with RFC2833 DTMF encoding.  I am having 
> problems with routines that input long strings of numbers, in that I 
> am getting more than a small number of double digit entries. As an 
> example, I have a section that asks for the user to enter a call 
> forwarding number, and then puts that number into a database. Almost 
> always, there are double digits when the user only intended to type a 
> single digit, no matter how carefully they entered their string.
>
>   Can anyone comment on how they may have solved this issue with Cisco 
> devices?  The units in question are running 2.16.
>
> JT
>
>
> <snippet of code where I'm inputting the number - line has already 
> been Answered>
>
> [class4.6]
> exten => change,1,ResponseTimeout(5)
> exten => change,2,Playback(special/edting-spd-dial-number)
> exten => change,3,SayDigits(${SPEEDDIAL})
> exten => change,4,Background(silence/1)
> exten => change,5,Background(special/entr-nmbr-fr-spddial-entry)
> exten => change,6,Background(special/and-prs-pound-whn-finished)
> exten => change,7,Background(silence/3)
> exten => change,8,Goto(5)
>
> ; strip off any extra pound or * symbols, and then set the variable
> exten => _X.,1,GotoIf($[$[${EXTEN:-1:1} = #] | $[${EXTEN:-1:1} = *]]?2:4)
> exten => _X.,2,StripLSD(1)
> exten => _X.,3,Goto(1)
> exten => _X.,4,DBput(${MYNUMBER}/FEAT/SPEED/${SPEEDDIAL}=${EXTEN})
> exten => _X.,5,Goto(class4.5,verify,1)
>
> exten => t,1,Goto(change,5)
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Bob Knight
[-w] the work option
bk at minusw.com
925-449-9163