[Asterisk-Users] ATA-186 Double Digit problems

[Brian West]

www.bkw.org/~brian/cisco/ata.html

check connectmode and audiomode.. I don't have this problem on mine.

bkw

On Thu, 20 Nov 2003, Tais M. Hansen wrote:

> On Thursday 20 November 2003 04:38, John Todd wrote:
> >     I'm using ATA-186 devices, with RFC2833 DTMF encoding.  I am
> > having problems with routines that input long strings of numbers, in
> > that I am getting more than a small number of double digit entries.
> > As an example, I have a section that asks for the user to enter a
> > call forwarding number, and then puts that number into a database.
> > Almost always, there are double digits when the user only intended to
> > type a single digit, no matter how carefully they entered their
> > string.
>
> Sounds very much like the problem we're having when using RFC2833. We're not
> using an ATA device however.
>
> Theory:
> If the endpoint doesn't properly remove the tone sound from the stream and
> sends the RFC2833 equivalent tone event, Asterisk might parse both the inband
> tone and the RFC2833 tone, which will result in two tones.
>
> --
> Regards,
> Tais M. Hansen
> ComX Networks
> Tel: +45-70257474
> Fax: +45-70257374
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> ------------ Output from gpg ------------
> gpg: Signature made Thu 20 Nov 2003 08:59:01 AM CST using DSA key ID B113DCC7
> gpg: Can't check signature: public key not found
>
>