[Asterisk-Users] Re: IAX2 trunking on one side only.

[Brian Schrock]

I sent this yesterday, but for some reawson it did not go through.

Yes,

ASTERISK1 = 2x TDM400P
ASTERISK2 = 3x X100P

I still cannot get it working past that. Is there something screwey with the
wcfxs drivers and Linux?

----- Original Message ----- 
From: "Louis-David Mitterrand" <vindex at apartia.org>
To: <asterisk-users at lists.digium.com>
Sent: Friday, November 07, 2003 1:59 AM
Subject: [Asterisk-Users] Re: IAX2 trunking on one side only.


> On Thu, Nov 06, 2003 at 10:41:15PM -0500, Brian Schrock wrote:
> > Hello,
> >
> > I have searched google, read everything on the mailing list, read
> > /usr/src/asterisk/README.iax and /usr/src/asterisk/doc/iax.txt(?), asked
on
> > the IRC channel and I cannot figure out what is wrong with my IAX2
trunk.
> >
> > Only asterisk2 of an <ASTERISK1>--LAN--<ASTERISK2>--PSTN will use IAX2
> > trunking. If I do an "iax2 show trunk" on asterisk1 it says 0 calls on
trunk
>
> Do you have a zaptel device on each side? AFAIR zaptel timing is
> required for trunking to work.
>
> -- 
> If Galileo is the spark that lights up the gas giant Jupiter, turning it
> into a second sun, that will be the last straw. We will then have no
> choice but to make safety the number one priority at NASA.
> -- falsification on /.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>