[Asterisk-Users] Re: IAX2 trunking on one side only.

[Brian Schrock]

Yes,

ASTERISK1 has 2x TDM400P and ASTERISK2 has 3 x100P cards in it.
I'll try to dork with the timer, but as long as wcfxo or wcfxs is loaded
shouldn't that take care of these issues?

----- Original Message ----- 
From: "Olle E. Johansson" <oej at edvina.net>
To: <asterisk-users at lists.digium.com>
Sent: Friday, November 07, 2003 4:02 PM
Subject: Re: [Asterisk-Users] Re: IAX2 trunking on one side only.


> Louis-David Mitterrand wrote:
> > On Thu, Nov 06, 2003 at 10:41:15PM -0500, Brian Schrock wrote:
> >
> >>Hello,
> >>
> >>I have searched google, read everything on the mailing list, read
> >>/usr/src/asterisk/README.iax and /usr/src/asterisk/doc/iax.txt(?), asked
on
> >>the IRC channel and I cannot figure out what is wrong with my IAX2
trunk.
> >>
> >>Only asterisk2 of an <ASTERISK1>--LAN--<ASTERISK2>--PSTN will use IAX2
> >>trunking. If I do an "iax2 show trunk" on asterisk1 it says 0 calls on
trunk
> >
> >
> > Do you have a zaptel device on each side? AFAIR zaptel timing is
> > required for trunking to work.
> >
> We have to rename "Zaptel timing" to "Asterisk timer", which is more
correct
> since there are several ways of getting a timer to work, only one of them
> is by using Zaptel cards.
>
> http://www.voip-info.org/tiki-index.php?page=Asterisk+timer
>
> /Olle
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>