[Asterisk-Users] NetJet Cards

[Eric Wieling]

You are missing a $ in front of {EXTEN:1}.  It should be ${EXTEN:1}

On Sat, 2003-11-01 at 22:55, Matthew Enger wrote:
> Hello,
> 
> I am trying to use 2 netjet cards under asterisk and isdn4linux. I am
> having a hard time trying to get them to work in terms of dial out. Does
> anyone have a working config I could look at for even one card (tried
> that, not much luck either).
> 
> When i dial out:
>     -- Accepting AUTHENTICATED call from 172.16.11.2, requested format =
> 2, actual format = 2
>     -- Executing Dial("IAX[menger at 172.16.11.2:5036]/2",
> "modem/g1/v{EXTEN:1}") in new stack
>     -- Called g1/v{EXTEN:1}
>     -- Modem[i4l]/ttyI0 is busy
>     -- Hungup 'Modem[i4l]/ttyI0'
>   == Everyone is busy at this time
>     -- Executing Congestion("IAX[menger at 172.16.11.2:5036]/2", "") in new
> stack
>   == Spawn extension (international, 90412463080, 2) exited non-zero on
> 'IAX[menger at 172.16.11.2:5036]/2'
>     -- Hungup 'IAX[menger at 172.16.11.2:5036]/2'
>     -- Registered 'menger' (AUTHENTICATED) at 172.16.11.2:5036
> 
> I am using devices /dev/ttyI0 for the first card and ttyI1 for the
> second card. I have loaded the module up using: 
> modprobe hisax type=20,20 protocol=2,2 id="HiSax"
> 
> I am running RedHat Linux 9.0 wth latest kernel from redhat.
> 
> Any help apart from buy a capi card would be most appreciated.
> 
> Thanks,
> 
> Matthew Enger
> menger at xi.com.au
> 
> 
> 
-- 
Sample configs, scripts, more : http://www.fnords.org/~eric/asterisk/

BTEL Consulting 504-899-1387 or 850-484-4545 or 877-677-9643