[Asterisk-Users] NetJet Cards

[Matthew Enger]

Hello,

I am trying to use 2 netjet cards under asterisk and isdn4linux. I am
having a hard time trying to get them to work in terms of dial out. Does
anyone have a working config I could look at for even one card (tried
that, not much luck either).

When i dial out:
    -- Accepting AUTHENTICATED call from 172.16.11.2, requested format =
2, actual format = 2
    -- Executing Dial("IAX[menger at 172.16.11.2:5036]/2",
"modem/g1/v{EXTEN:1}") in new stack
    -- Called g1/v{EXTEN:1}
    -- Modem[i4l]/ttyI0 is busy
    -- Hungup 'Modem[i4l]/ttyI0'
  == Everyone is busy at this time
    -- Executing Congestion("IAX[menger at 172.16.11.2:5036]/2", "") in new
stack
  == Spawn extension (international, 90412463080, 2) exited non-zero on
'IAX[menger at 172.16.11.2:5036]/2'
    -- Hungup 'IAX[menger at 172.16.11.2:5036]/2'
    -- Registered 'menger' (AUTHENTICATED) at 172.16.11.2:5036

I am using devices /dev/ttyI0 for the first card and ttyI1 for the
second card. I have loaded the module up using: 
modprobe hisax type=20,20 protocol=2,2 id="HiSax"

I am running RedHat Linux 9.0 wth latest kernel from redhat.

Any help apart from buy a capi card would be most appreciated.

Thanks,

Matthew Enger
menger at xi.com.au






-- 
Matthew Enger <menger at xi.com.au>
Xintegration