[Asterisk-Users] iconnecthere 480 error: is there a workaround?

[Luke Howard]

I've found the same.

If I make an outgoing call (snom 200 handset), I get about 5 seconds
of audio and then it drops out (very occasionally it does work).

Incoming calls appear to work, though.

  -- Executing Goto("SIP/515-Office-143b", "iconnecthere-ulaw|91800XXXXXXX|1") in new stack
  -- Goto (iconnecthere-ulaw,91800XXXXXXX,1)
  -- Executing StripMSD("SIP/515-Office-143b", "1") in new stack
  -- Executing Dial("SIP/515-Office-143b", "SIP/1800XXXXXXX at iconnecthere") in new stack
  -- Called 1800XXXXXXX at iconnecthere
  -- SIP/iconnecthere-960b answered SIP/515-Office-143b
  -- Attempting native bridge of SIP/515-Office-143b and SIP/iconnecthere-960b
  -- Got SIP response 480 "Temporarily not available" back from 213.137.73.178
 == Spawn extension (iconnecthere-ulaw, 1800XXXXXXX, 2) exited non-zero on 'SIP/515-Office-143b'

SIP config is:

[general]
port=5060
bindaddr=0.0.0.0
context=sip-remote
disallow=all
allow=ulaw
allow=alaw
tos=lowdelay
tos=184
register => 1XXXXXXXXXX:XXXX at natrelay.deltathree.com

[iconnecthere]
type=friend
username=XXXXXXXX
password=XXXX
host=sipauth.deltathree.com
context=iconnecthere-ulaw
callerid="PADL Software Pty Ltd" <(XXX) XXX XXXX>
;txgain = 5.0;
;rxgain = 5.0;
inbanddtmf=1

-- Luke

P.S. Is anyone planning on licensing G 723.1 for use with Asterisk? As
I understand it, buying a LineJACK won't suffice if the card's DSP is
not actually used.
--
Luke Howard | PADL Software Pty Ltd | www.padl.com