[Asterisk-Users] Use 1 port of an E400P as IP connection

[David Luyens]

Thanks Martin, could you point me into the direction on how to do this?

David

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Martin Pycko
Sent: Thursday, March 20, 2003 7:10 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Use 1 port of an E400P as IP connection


Sure. You configure it as HDLC or CISCO HDLC and you have
hdlc0 interface to send data.

regards
Martin

On Thu, 20 Mar 2003, David Luyens wrote:

> Hi,
>
> I would like to use * as a compression box.
> Between 2 sites I have an E1 leased line.
>
> So would it be possible to use 1 port of an E400P card to route my IP 
> IAX calls over in order to cut the ip router out of the picture?
>
> David
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users