[Asterisk-Users] Tor2 modprobe problem

[asterisk at thehowertons.net]

Here is what I have found.  I could not get the modules loaded.  I took
the TDM400P out of my machine moved it to another PCI slot and restarted. 
The modules loaded with no problems and asterisk runs just fine.

Ryan

> On Tue, 2003-06-24 at 22:19, asterisk at thehowertons.net wrote:
>> I just received my dev kit and installed the hardware.  I followed the
>> directions Digium sends out to the letter and when I ran modprobe tor2
>> I got the following error:
>>
>> /lib/modules/2.4.18-19.7.x/misc/tor2.o: init_module: No such device
>> Hint: insmod errors can be caused by incorrect module parameters,
>> including invalid IO or IRQ parameters.
>>       You may find more information in syslog or the output from dmesg
>> /lib/modules/2.4.18-19.7.x/misc/tor2.o: insmod
>> /lib/modules/2.4.18-19.7.x/misc/tor2.o failed
>> /lib/modules/2.4.18-19.7.x/misc/tor2.o: insmod tor2 failed
>>
>> What have I missed?
>
> This would be because your card was not detected.
>
> Since I haven't kept up with what was in the dev kit, do you have the 4
> port T1 card? Tor2 is for the 4 port T1/E1 cards. If it is a single port
> T1 card, you need to use the wct1xxp module.
> --
> Steven Critchfield <critch at basesys.com>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users