[Asterisk-Users] Tor2 modprobe problem

[Steven Critchfield]

On Tue, 2003-06-24 at 22:19, asterisk at thehowertons.net wrote:
> I just received my dev kit and installed the hardware.  I followed the
> directions Digium sends out to the letter and when I ran modprobe tor2 I
> got the following error:
> 
> /lib/modules/2.4.18-19.7.x/misc/tor2.o: init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.18-19.7.x/misc/tor2.o: insmod
> /lib/modules/2.4.18-19.7.x/misc/tor2.o failed
> /lib/modules/2.4.18-19.7.x/misc/tor2.o: insmod tor2 failed
> 
> What have I missed?

This would be because your card was not detected. 

Since I haven't kept up with what was in the dev kit, do you have the 4
port T1 card? Tor2 is for the 4 port T1/E1 cards. If it is a single port
T1 card, you need to use the wct1xxp module. 
-- 
Steven Critchfield <critch at basesys.com>