[Asterisk-Users] Valiant Comms VCL 30 Channel bank + Digium E100P

[Joe Antkowiak]

Also, are all the fxo channels "connected" to the t1 channels on the channel
bank?  I believe you have to map them just like on the CAC Adits...

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Martin Pycko
Sent: Thursday, June 05, 2003 10:40 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Valiant Comms VCL 30 Channel bank + Digium
E100P

Do you really have the channels in asterisk ?
"zap show channels"

Is the alarm on the E1 circuit ?

Martin

On Thu, 5 Jun 2003, Jay Banda wrote:

> Hello All.
>
> Does anyone have experience with the Valiant Comms vcl30 channel
> and the Digium E100P in asterisk ? We have the vcl30 channel bank,
> loaded with FXO interfaces. We have set up * for fxs in zaptel.conf
> and in zapata.conf, but are not able to get any incoming calls.
>
> The vcl fxs interfaces show that they are ringing ( incoming call from
> PSTN ) , but the * does not answer ( or am I missing something , I think
> the E100P card is supposed to indicate that there is an incoming call ?)
>
> If anyone is able to point me in a remotely correct direction, I will be
> eternally grateful :)
>
> Kind regards to all
>
> Jay Banda
> Snr Network Eng
> CopperNET Solutions
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users