[Asterisk-Users] Setting up A TDM400P

[Ing. Angel Gomez Garcia]

Hi.

I have 1 TDM400P and 1 X100P  ( dev kit lite TDM ), and this are my  
zaptel and zapata conf files, both interfaces are up and running....

zaptel.conf:
----------------
fxsks=1
fxoks=2
loadzone = us
defaultzone=us

-----------------------

zapata.conf
--------------------
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=1
immediate=no
context=bell
signalling=fxs_ks
channel=1
context=home
signalling=fxo_ks
channel=2

-------------------------------------------

i have to modprobe first wcfxo then wcfxs and then do a ztcfg -vv before 
running asterisk.

Luck


Jay Tyndall wrote:

> Thanks for the reply,
>
> I have made those changes and still get the following error:
>
> WARNING[16384]: File chan_zap.c, Line 576 (zt_open): Unable to specify 
> channel 1: No such device or address
> ERROR[16384]: File chan_zap.c, Line 4746 (mkintf): Unable to open 
> channel 1: No such device or address
> here = 0, tmp->channel = 0, channel = 1
> ERROR[16384]: File chan_zap.c, Line 6404 (load_module): Unable to 
> register channel '1'
> WARNING[16384]: File loader.c, Line 299 (ast_load_resource): 
> chan_zap.so: load_module failed, returning -1
> WARNING[16384]: File loader.c, Line 394 (load_modules): Loading module 
> chan_zap.so failed!
>
>
> I find it quite odd, expecially since the card is detected and showing 
> when I do a dmesg.
>
> Jay
>
>
> On Sun, 13 Jul 2003 23:54:13 -0500, John Bigelow <angler at knology.net> 
> wrote:
>
>> The channel has to come after the signalling and other configuration 
>> lines.
>> It should look something like this:
>>
>> signalling=fxo_ks
>> context=internal
>> channel => 1-3
>>
>> Don't forget to configure zaptel.conf either. Add this line to it.
>>
>> fxoks=1-3
>>
>>
>> -John
>>
>> ----- Original Message ----- From: "Jay Tyndall" 
>> <asterisk at tyndall.id.au>
>> To: <asterisk-users at lists.digium.com>
>> Sent: Sunday, July 13, 2003 11:38 PM
>> Subject: [Asterisk-Users] Setting up A TDM400P
>>
>>
>>>
>>>
>>> Hi,
>>>
>>> I am having some trouble getting a TDM400P working, and would be very
>>> appriciative of  some ideas.
>>>
>>> I have installed a TDM400P, and downloaded the appropriate files 
>>> from CVS,
>>> compiled, installed and modprobe'd the devices.
>>>
>>> From dmesg:
>>> Module 0: Initialized
>>> Module 1: Initialized
>>> Module 2: Initialized
>>> Module 3: Not installed
>>> Found a Wildcard FXS: Wildcard S400P Prototype (4 modules)
>>>
>>> So, it has found the card OK,  but I am  little confused as to what 
>>> I need
>>> to put in zapata.conf to make these 3 ports work with the analog 
>>> phones I
>>> have plugged into these ports.
>>>
>>> I have tried looking at the docs on the digium site, but cannot seem to
>>
>> get
>>
>>> it worked out.
>>>
>>> I tried putting the following in zapata.conf
>>> channel => 1
>>> signalling => fxo_ks
>>>
>>> And this in extensions.conf
>>> exten => 200,1,Dial(Zap/1)
>>>
>>>
>>> When I start asterisk, I get the following:
>>> [chan_zap.so] => (Zapata Telephony)
>>> WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring
>>> switchtype
>>> WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring 
>>> rxwink
>>> WARNING[16384]: File chan_zap.c, Line 576 (zt_open): Unable to specify
>>> channel 1: No such device or address
>>> ERROR[16384]: File chan_zap.c, Line 4746 (mkintf): Unable to open 
>>> channel
>>> 1: No such device or address
>>> here = 0, tmp->channel = 0, channel = 1
>>> ERROR[16384]: File chan_zap.c, Line 6404 (load_module): Unable to 
>>> register
>>> channel '1'
>>> WARNING[16384]: File loader.c, Line 299 (ast_load_resource): 
>>> chan_zap.so:
>>> load_module failed, returning -1
>>> WARNING[16384]: File loader.c, Line 394 (load_modules): Loading module
>>> chan_zap.so failed!
>>>
>>>
>>> Thanks for your help
>>> Jay
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>