[Asterisk-Users] Setting up A TDM400P

[Jay Tyndall]

Thanks for the reply,

I have made those changes and still get the following error:

WARNING[16384]: File chan_zap.c, Line 576 (zt_open): Unable to specify 
channel 1: No such device or address
ERROR[16384]: File chan_zap.c, Line 4746 (mkintf): Unable to open channel 
1: No such device or address
here = 0, tmp->channel = 0, channel = 1
ERROR[16384]: File chan_zap.c, Line 6404 (load_module): Unable to register 
channel '1'
WARNING[16384]: File loader.c, Line 299 (ast_load_resource): chan_zap.so: 
load_module failed, returning -1
WARNING[16384]: File loader.c, Line 394 (load_modules): Loading module 
chan_zap.so failed!


I find it quite odd, expecially since the card is detected and showing when 
I do a dmesg.

Jay


On Sun, 13 Jul 2003 23:54:13 -0500, John Bigelow <angler at knology.net> 
wrote:

> The channel has to come after the signalling and other configuration 
> lines.
> It should look something like this:
>
> signalling=fxo_ks
> context=internal
> channel => 1-3
>
> Don't forget to configure zaptel.conf either. Add this line to it.
>
> fxoks=1-3
>
>
> -John
>
> ----- Original Message ----- From: "Jay Tyndall" <asterisk at tyndall.id.au>
> To: <asterisk-users at lists.digium.com>
> Sent: Sunday, July 13, 2003 11:38 PM
> Subject: [Asterisk-Users] Setting up A TDM400P
>
>
>>
>>
>> Hi,
>>
>> I am having some trouble getting a TDM400P working, and would be very
>> appriciative of  some ideas.
>>
>> I have installed a TDM400P, and downloaded the appropriate files from 
>> CVS,
>> compiled, installed and modprobe'd the devices.
>>
>> From dmesg:
>> Module 0: Initialized
>> Module 1: Initialized
>> Module 2: Initialized
>> Module 3: Not installed
>> Found a Wildcard FXS: Wildcard S400P Prototype (4 modules)
>>
>> So, it has found the card OK,  but I am  little confused as to what I 
>> need
>> to put in zapata.conf to make these 3 ports work with the analog phones 
>> I
>> have plugged into these ports.
>>
>> I have tried looking at the docs on the digium site, but cannot seem to
> get
>> it worked out.
>>
>> I tried putting the following in zapata.conf
>> channel => 1
>> signalling => fxo_ks
>>
>> And this in extensions.conf
>> exten => 200,1,Dial(Zap/1)
>>
>>
>> When I start asterisk, I get the following:
>> [chan_zap.so] => (Zapata Telephony)
>> WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring
>> switchtype
>> WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring 
>> rxwink
>> WARNING[16384]: File chan_zap.c, Line 576 (zt_open): Unable to specify
>> channel 1: No such device or address
>> ERROR[16384]: File chan_zap.c, Line 4746 (mkintf): Unable to open 
>> channel
>> 1: No such device or address
>> here = 0, tmp->channel = 0, channel = 1
>> ERROR[16384]: File chan_zap.c, Line 6404 (load_module): Unable to 
>> register
>> channel '1'
>> WARNING[16384]: File loader.c, Line 299 (ast_load_resource): 
>> chan_zap.so:
>> load_module failed, returning -1
>> WARNING[16384]: File loader.c, Line 394 (load_modules): Loading module
>> chan_zap.so failed!
>>
>>
>> Thanks for your help
>> Jay
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/