[Asterisk-Users] Re: insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying
to do.)
mvickers at real.com
mvickers at real.com
Mon Jul 14 22:28:42 MST 2003
also output of ztcfg...
root at asterisk01:~# ztcfg -vvv
Zaptel Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Dynamic span 1: driver eth, addr eth0/00:02:b3:35:43:9c, channels 24,
timing 0
Channel map:
Channel 01: E & M (Default) (Slaves: 01)
Channel 02: E & M (Default) (Slaves: 02)
Channel 03: E & M (Default) (Slaves: 03)
Channel 04: E & M (Default) (Slaves: 04)
Channel 05: E & M (Default) (Slaves: 05)
Channel 06: E & M (Default) (Slaves: 06)
Channel 07: E & M (Default) (Slaves: 07)
Channel 08: E & M (Default) (Slaves: 08)
Channel 09: E & M (Default) (Slaves: 09)
Channel 10: E & M (Default) (Slaves: 10)
Channel 11: E & M (Default) (Slaves: 11)
Channel 12: E & M (Default) (Slaves: 12)
Channel 13: E & M (Default) (Slaves: 13)
Channel 14: E & M (Default) (Slaves: 14)
Channel 15: E & M (Default) (Slaves: 15)
Channel 16: E & M (Default) (Slaves: 16)
Channel 17: E & M (Default) (Slaves: 17)
Channel 18: E & M (Default) (Slaves: 18)
Channel 19: E & M (Default) (Slaves: 19)
Channel 20: E & M (Default) (Slaves: 20)
Channel 21: E & M (Default) (Slaves: 21)
Channel 22: E & M (Default) (Slaves: 22)
Channel 23: E & M (Default) (Slaves: 23)
Channel 24: E & M (Default) (Slaves: 24)
24 channels configured.
ZT_SPANCONFIG failed on span 1: No such device or address (6)
root at asterisk01:~#
Mark Vickers, RealNetworks Inc. Desk: (206) 674-2391 Fax: (206)674-3588
On Mon, 14 Jul 2003 mvickers at real.com wrote:
>
> Thanks in advance
>
> root at asterisk01:~# modprobe wcfxo
> /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device
> /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by
> incorrect module parameters, including invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o
> failed
> /lib/modules/2.4.20/misc/wcfxo.o: insmod wcfxo failed
> root at asterisk01:~#
>
>
>
> root at asterisk01:~# cat /etc/zaptel.conf |grep -v "#"
>
> span=1,1,0,esf,b8zs
> dynamic=eth,eth0/00:02:b3:35:43:9c,24,0
> e&m=1-24
> loadzone = us
> defaultzone=us
> root at asterisk01:~#
>
> BTW what the hell is the line "dynamic=" ;-)
>
>
> root at asterisk01:~# cat /etc/asterisk/zapata.conf |grep -v ";"
>
> [channels]
> context=default
> switchtype=national
> signalling=em_w
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
>
> immediate=no
>
> root at asterisk01:~#
>
> root at asterisk01:~# cat /etc/modules.conf
> options torisa base=0xd0000
> alias char-major-196 torisa
> post-install tor2 /sbin/ztcfg
> post-install wcfxo /sbin/ztcfg
> post-install wct1xxp /sbin/ztcfg
> post-install wcfxs /sbin/ztcfg
> post-install wcfxsusb /sbin/ztcfg
> post-install torisa /sbin/ztcfg
> post-install wct4xxp /sbin/ztcfg
> root at asterisk01:~#
>
>
> root at asterisk01:~# lsmod
> Module Size Used by Not tainted
> zaptel 179712 0 (unused)
> ppp_generic 15776 0 [zaptel]
> slhc 4384 0 [ppp_generic]
> root at asterisk01:~#
> root at asterisk01:~#
>
>
> root at asterisk01:~# cat /proc/pci
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory
> Controller Hub] (rev 3).
> Bus 0, device 1, function 0:
> VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset
> Graphics Controller] (rev 3).
> IRQ 11.
> Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
> Non-prefetchable 32 bit memory at 0xffa80000 [0xffafffff].
> Bus 0, device 30, function 0:
> PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 2).
> Master Capable. No bursts. Min Gnt=2.
> Bus 0, device 31, function 0:
> ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 2).
> Bus 0, device 31, function 1:
> IDE interface: Intel Corp. 82801AA IDE (rev 2).
> I/O at 0xffa0 [0xffaf].
> Bus 0, device 31, function 2:
> USB Controller: Intel Corp. 82801AA USB (rev 2).
> IRQ 10.
> I/O at 0xef80 [0xef9f].
> Bus 0, device 31, function 3:
> SMBus: Intel Corp. 82801AA SMBus (rev 2).
> IRQ 9.
> I/O at 0xefa0 [0xefaf].
> Bus 1, device 1, function 0:
> Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8).
> IRQ 10.
> Master Capable. Latency=64. Min Gnt=8.Max Lat=56.
> Non-prefetchable 32 bit memory at 0xff8fe000 [0xff8fefff].
> I/O at 0xdf00 [0xdf3f].
> Non-prefetchable 32 bit memory at 0xff700000 [0xff7fffff].
> Bus 1, device 9, function 0:
> Network controller: Tiger Jet Network Inc. Model 300 128k (rev 0).
> IRQ 9.
> Master Capable. Latency=64. Min Gnt=1.Max Lat=128.
> I/O at 0xd800 [0xd8ff].
> Non-prefetchable 32 bit memory at 0xff8ff000 [0xff8fffff].
> root at asterisk01:~#
>
>
>
> root at asterisk01:~#
> root at asterisk01:~# cat /proc/interrupts
> CPU0
> 0: 163838 XT-PIC timer
> 1: 2 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 10: 7553 XT-PIC eth0
> 14: 3349 XT-PIC ide0
> NMI: 0
> LOC: 163790
> ERR: 0
> MIS: 0
> root at asterisk01:~#
>
>
> Thanks again!
>
>
> Mark Vickers, RealNetworks Inc. Desk: (206) 674-2391 Fax: (206)674-3588
>
More information about the asterisk-users
mailing list