[Asterisk-Users] insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)

[mvickers at real.com]

Thanks in advance

root at asterisk01:~# modprobe wcfxo
/lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device
/lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o
failed
/lib/modules/2.4.20/misc/wcfxo.o: insmod wcfxo failed
root at asterisk01:~#



root at asterisk01:~# cat /etc/zaptel.conf |grep -v "#"

span=1,1,0,esf,b8zs
dynamic=eth,eth0/00:02:b3:35:43:9c,24,0
e&m=1-24
loadzone = us
defaultzone=us
root at asterisk01:~#

BTW what the hell is the line "dynamic="  ;-)


root at asterisk01:~# cat /etc/asterisk/zapata.conf |grep -v ";"

[channels]
context=default
switchtype=national
signalling=em_w
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

root at asterisk01:~#

root at asterisk01:~# cat /etc/modules.conf
options torisa base=0xd0000
alias char-major-196 torisa
post-install tor2 /sbin/ztcfg
post-install wcfxo /sbin/ztcfg
post-install wct1xxp /sbin/ztcfg
post-install wcfxs /sbin/ztcfg
post-install wcfxsusb /sbin/ztcfg
post-install torisa /sbin/ztcfg
post-install wct4xxp /sbin/ztcfg
root at asterisk01:~#


root at asterisk01:~# lsmod
Module                  Size  Used by    Not tainted
zaptel                179712   0  (unused)
ppp_generic            15776   0  [zaptel]
slhc                    4384   0  [ppp_generic]
root at asterisk01:~#
root at asterisk01:~#


root at asterisk01:~# cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory
Controller Hub] (rev 3).
  Bus  0, device   1, function  0:
    VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset
Graphics Controller] (rev 3).
      IRQ 11.
      Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
      Non-prefetchable 32 bit memory at 0xffa80000 [0xffafffff].
  Bus  0, device  30, function  0:
    PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 2).
      Master Capable.  No bursts.  Min Gnt=2.
  Bus  0, device  31, function  0:
    ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 2).
  Bus  0, device  31, function  1:
    IDE interface: Intel Corp. 82801AA IDE (rev 2).
      I/O at 0xffa0 [0xffaf].
  Bus  0, device  31, function  2:
    USB Controller: Intel Corp. 82801AA USB (rev 2).
      IRQ 10.
      I/O at 0xef80 [0xef9f].
  Bus  0, device  31, function  3:
    SMBus: Intel Corp. 82801AA SMBus (rev 2).
      IRQ 9.
      I/O at 0xefa0 [0xefaf].
  Bus  1, device   1, function  0:
    Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8).
      IRQ 10.
      Master Capable.  Latency=64.  Min Gnt=8.Max Lat=56.
      Non-prefetchable 32 bit memory at 0xff8fe000 [0xff8fefff].
      I/O at 0xdf00 [0xdf3f].
      Non-prefetchable 32 bit memory at 0xff700000 [0xff7fffff].
  Bus  1, device   9, function  0:
    Network controller: Tiger Jet Network Inc. Model 300 128k (rev 0).
      IRQ 9.
      Master Capable.  Latency=64.  Min Gnt=1.Max Lat=128.
      I/O at 0xd800 [0xd8ff].
      Non-prefetchable 32 bit memory at 0xff8ff000 [0xff8fffff].
root at asterisk01:~#



root at asterisk01:~#
root at asterisk01:~# cat /proc/interrupts
           CPU0
  0:     163838          XT-PIC  timer
  1:          2          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
 10:       7553          XT-PIC  eth0
 14:       3349          XT-PIC  ide0
NMI:          0
LOC:     163790
ERR:          0
MIS:          0
root at asterisk01:~#


Thanks again!


Mark Vickers, RealNetworks Inc.  Desk: (206) 674-2391  Fax: (206)674-3588