[Asterisk-Users] "Phone Unprovisioned" Message in IP 7940 ?

[William Carlson]

proxy1_address: "`129.82.44.223"

it that ' really there? that could be it
  Thanks,
    Will

----- Original Message ----- 
From: "Sascha Knific" <knific at k-sysdes.net>
To: <asterisk-users at lists.digium.com>
Sent: Monday, December 08, 2003 6:07 AM
Subject: AW: [Asterisk-Users] "Phone Unprovisioned" Message in IP 7940 ?


>
> Hi Tony
>
> The configuration looks fine to me. Did you check the log of your tftp
> server? Do the phone config files get loaded correctly? Do check also
> the Settings/Status/Status Messages of your phone for any errors.
>
> Sascha
>
> -------------------------------------------------------
> Sascha Knific K Systems & Design
> Tel. +49-8151-773260 Wittelsbacherstr. 6a
> Fax. +49-8151-773262 82319 Starnberg, Germany
> Leo +49-8151-773261 WGS84: N57°59,875' E011°20,568'
> knific at k-sysdes.net http://www.k-sysdes.net
>
>
> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] Im Auftrag von tony banks
> Gesendet: Montag, 8. Dezember 2003 03:21
> An: asterisk-users at lists.digium.com
> Betreff: [Asterisk-Users] "Phone Unprovisioned" Message in IP 7940 ?
>
> Hello all,
>
> I am newbie to Telephony world (IP and PSTN). Please excuse me if you
> find my questions very dumb.
>
> I am trying to configure my IP 7940 with the Asterisk, when phone boots
> up it only shows the message "Phone Unprovisioned" on the LCD panel.
>
> Under Settings-->SIP Configuration-->Line 1 Settings I noticed that
> Proxy Address is set the UNPROVISIONED, I am not sure why it is showing
> that though I did set proxy1_address: "`129.82.44.223" in
> SIPDefault.conf, which is my Astersik server.
>
>
> Following SIP image is installed on the IP 7940.
>
> Application Load ID
> POS30203
>
> My sip.conf has following lines added for the the Phone
>
> [810]
> type=friend
> secret=pass
> host=dynamic
> callerid=JOSE <810>
> defaultip=129.82.44.205
>
>
> In my SIP<mac>.conf file I have made following entries
>
> # Line 1 appearance
> line1_name: "810"
>
>
> # Line 1 Registration Authentication
> line1_authname: "810"
>
>
> # Line 1 Registration Password
> line1_password: "pass"
>
> Do you see any problem here, Please let me know if I should give any
> more information.
>
> Regards
> Tony
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>