AW: [Asterisk-Users] "Phone Unprovisioned" Message in IP 7940 ?

[Sascha Knific]

Hi Tony

The configuration looks fine to me. Did you check the log of your tftp
server? Do the phone config files get loaded correctly? Do check also
the Settings/Status/Status Messages of your phone for any errors.

Sascha

-------------------------------------------------------
Sascha Knific           K Systems & Design
Tel. +49-8151-773260    Wittelsbacherstr. 6a
Fax. +49-8151-773262    82319 Starnberg, Germany
Leo  +49-8151-773261    WGS84: N57°59,875' E011°20,568'
knific at k-sysdes.net     http://www.k-sysdes.net


-----Ursprüngliche Nachricht-----
Von: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] Im Auftrag von tony banks
Gesendet: Montag, 8. Dezember 2003 03:21
An: asterisk-users at lists.digium.com
Betreff: [Asterisk-Users] "Phone Unprovisioned" Message in IP 7940 ?

Hello all,

I am newbie to Telephony world (IP and PSTN). Please excuse me if you
find my questions very dumb.

I am trying to configure my IP 7940 with the Asterisk, when phone boots
up it only shows the message "Phone Unprovisioned" on the LCD panel.

Under Settings-->SIP Configuration-->Line 1 Settings I noticed that 
Proxy Address is set the UNPROVISIONED, I am not sure why it is showing
that though I did set proxy1_address: "`129.82.44.223" in
SIPDefault.conf, which is my Astersik server. 


Following SIP image is installed on the IP 7940.

Application Load ID    
POS30203

My sip.conf has following lines added for the the Phone

[810]
type=friend
secret=pass
host=dynamic
callerid=JOSE <810>
defaultip=129.82.44.205


In my SIP<mac>.conf file I have made following entries

# Line 1 appearance
line1_name: "810"
                                                                       
                                                    
# Line 1 Registration Authentication
line1_authname: "810"
                                                                       
                                                    
# Line 1 Registration Password
line1_password: "pass"

Do you see any problem here, Please let me know if I should give any
more information.

Regards
Tony