[asterisk-r2] Dnis que comienza con *

[Mc GRATH Ricardo]

Hola Laura.

Pregunta tenes configurado el modo avanzado en la configuración openr2?
Mc GRATH Ricardo


________________________________
From: asterisk-r2 [asterisk-r2-bounces at lists.digium.com] On Behalf Of Laura Maurizi [lauramaurizi at gmail.com]
Sent: 08 November 2018 01:23
To: asterisk-r2 at lists.digium.com
Subject: [asterisk-r2] Dnis que comienza con *

Hola:
Tengo un cliente que tiene varias aplicanes que comienzan con *, *123 es una de ellas. Mientras usamos la librería Unicall no hubo problemas. Ahora actualizamos el servidor e instalé asterisk 13 con openr2. La llamadas entrantes que comienzan con * se cortan. Este es el log de la llamada:
[23:28:21:152] [Thread: 139697024898816] [Chan 1] - Call started at Wed Nov  7 23:28:21 2018 on chan 1 [openr2 version 1.3.3, revision (release)]
[23:28:21:152] [Thread: 139697024898816] [Chan 1] - Initialized R2 MF detector
[23:28:21:152] [Thread: 139697024898816] [Chan 1] - CAS Tx >> [SEIZE ACK] 0x0C
[23:28:21:152] [Thread: 139697024898816] [Chan 1] - CAS Raw Tx >> 0x0D
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - MF Rx << B [ON]
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Attempting to cancel timer timer 0
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Cannot cancel timer 0
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Protocol error. Reason = Invalid Multi Frequency Tone, R2 State = Seize ACK Transmitted, MF state = Seize ACK Transmitted, MF Group = Backward MF init, CAS = 0x00
DNIS = , ANI = , MF = 0x42
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Attempting to cancel timer timer 0
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Cannot cancel timer 0

En extensions.conf tengo definido tanto *123 como B123.

Desde ya agradezco la ayuda que me puedan proprocionar.
Saludos,
Laura
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20181108/4f6b8390/attachment.html>