[asterisk-r2] Dnis que comienza con *

[Laura Maurizi]

Hola:
Tengo un cliente que tiene varias aplicanes que comienzan con *, *123 es
una de ellas. Mientras usamos la librería Unicall no hubo problemas. Ahora
actualizamos el servidor e instalé asterisk 13 con openr2. La llamadas
entrantes que comienzan con * se cortan. Este es el log de la llamada:
[23:28:21:152] [Thread: 139697024898816] [Chan 1] - Call started at Wed
Nov  7 23:28:21 2018 on chan 1 [openr2 version 1.3.3, revision (release)]
[23:28:21:152] [Thread: 139697024898816] [Chan 1] - Initialized R2 MF
detector
[23:28:21:152] [Thread: 139697024898816] [Chan 1] - CAS Tx >> [SEIZE ACK]
0x0C
[23:28:21:152] [Thread: 139697024898816] [Chan 1] - CAS Raw Tx >> 0x0D
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - MF Rx << B [ON]
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Attempting to cancel
timer timer 0
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Cannot cancel timer 0
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Protocol error. Reason
= Invalid Multi Frequency Tone, R2 State = Seize ACK Transmitted, MF state
= Seize ACK Transmitted, MF Group = Backward MF init, CAS = 0x00
DNIS = , ANI = , MF = 0x42
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Attempting to cancel
timer timer 0
[23:28:21:236] [Thread: 139697024898816] [Chan 1] - Cannot cancel timer 0

En extensions.conf tengo definido tanto *123 como B123.

Desde ya agradezco la ayuda que me puedan proprocionar.
Saludos,
Laura
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20181108/3783fedb/attachment.html>