[asterisk-r2] begginer question - r2test results

[Gustavo Cremella]

Hi! Using the loop connector on a E1 port will not work for call testing.
You can do your own call testing using a cross connect cable between 2 E1
ports of your card, both configured for R2 signaling. And that cross
connect cable is not an ethernet one, so you have to wire it on the right
way.

El ene. 7, 2016 17:29, "Marcelo Amorim Fernandes" <marceloamorim46 at gmail.com>
escribió:

> this is the current state of dahdi_tool ( link for the picture )
>
> https://drive.google.com/open?id=0B2Gw8axvW65mSElZSm5SVkhJXy1yUWN2enBPVlltZ3EyZERz
>
> and we have only 10 channels, so its 1-10
>
> all calls receiveing from E1 can't reach the asterisk and for the caller
> return busy.
>
> all calls dialing to E1 gave us that message I posted before.
>
> Att,
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20160108/51697e71/attachment.html>