[asterisk-r2] Fwd: Falha asterisk com sinalização r2d

[natalia silva]

Hi

thanks for help

my channels are IDLE

asterisk*CLI> mfcr2 show channels
Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS   Rx CAS
   1 BR      10      4        Yes       No               IDLE     IDLE
   2 BR      10      4        Yes       No               IDLE     IDLE
   3 BR      10      4        Yes       No               IDLE     IDLE
   4 BR      10      4        Yes       No               IDLE     IDLE
   5 BR      10      4        Yes       No               IDLE     IDLE
   6 BR      10      4        Yes       No               IDLE     IDLE
   7 BR      10      4        Yes       No               IDLE     IDLE
   8 BR      10      4        Yes       No               IDLE     IDLE
   9 BR      10      4        Yes       No               IDLE     IDLE
  10 BR      10      4        Yes       No               IDLE     IDLE
  11 BR      10      4        Yes       No               IDLE     IDLE
  12 BR      10      4        Yes       No               IDLE     IDLE
  13 BR      10      4        Yes       No               IDLE     IDLE
  14 BR      10      4        Yes       No               IDLE     IDLE
  15 BR      10      4        Yes       No               IDLE     IDLE

________________________________________________________________

Hi

It seems a CAS problem, you can check with mfcr2 show channels, should
have something as the following;
CLI> mfcr2 show channels
Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS   Rx CAS
   1 BR      20      4        No        No               IDLE     IDLE
   ....
  15 BR      20      4        No        No               IDLE     IDLE

In case of RX CAS figured BLOCK please check with Telco.

good luck

Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2><mailto:mcgrathr
at mail2web.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>>

________________________________
From: asterisk-r2-bounces at lists.digium.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>
[asterisk-r2-bounces at lists.digium.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>] On Behalf Of
natalia silva [natalianew at gmail.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>]
Sent: 16 May 2014 09:47
To: asterisk-r2 at lists.digium.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>
Subject: [asterisk-r2] Fwd: Falha asterisk com sinalização r2d



Hi, good afternoon
Dear I am in need of much help.
I'm sending here why the list has not adopted me, and I'm running out of time

I'm running

Asterisk 10.7.1 OpenR2 with version: 1.2.0, digium card.

And got the following error when making connections

- Executing [931091062 at localphones
<http://lists.digium.com/mailman/listinfo/asterisk-r2>:1]
Dial("SIP/4192-00000001", "DAHDI/g1/31091062,60") in new stack
    -- Called DAHDI/g1/31091062
[May 15 09:56:05] NOTICE[15718]: chan_dahdi.c:4191
dahdi_r2_on_line_blocked: Far end blocked on chan 3
[May 15 09:56:13] WARNING[15785]: chan_dahdi.c:4166
dahdi_r2_write_log: Chan 1 - Seize Timeout Expired!
[May 15 09:56:13] ERROR[15785]: chan_dahdi.c:4169 dahdi_r2_write_log:
Chan 1 - Protocol error. Reason = Seize Timeout, R2 State = Seize
Transmitted, MF state = MF Engine Off, MF Group = Forward MF init, CAS
= 0x08
DNIS = 31091062, ANI = 4192, MF = 0x20
[May 15 09:56:13] ERROR[15785]: chan_dahdi.c:3954
dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 1: Seize
Timeout
    -- Hungup 'DAHDI/1-1'
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [931091062 at localphones
<http://lists.digium.com/mailman/listinfo/asterisk-r2>:2]
Hangup("SIP/4192-00000001", "") in new stack
  == Spawn extension (localphones, 931091062, 2) exited non-zero on
'SIP/4192-00000001'
[May 15 09:56:13] NOTICE[15718]: chan_dahdi.c:4200
dahdi_r2_on_line_idle: Far end unblocked on chan 3


Have made ​​sure to test and with the operator that the channels are
not blocked and there are no locks on her part.


follow my configs

system.conf

# Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) HDB3/ ClockSource
span=1,1,0,cas,hdb3
cas=1-15:1101
#bchan=1-15
#fxsks=1-15
# termtype: unknown
#bchan=1-15:1101
#dchan=16
#echocanceller=mg2,1-15

# Global data

loadzone        = br
defaultzone     = br


chan_dahdi.conf


[trunkgroups]

[channels]
signalling=mfcr2
mfcr2_variant=br
mfcr2_get_ani_first=no
mfcr2_max_ani=20
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_call_files=yes
mfcr2_logging=all
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
mfcr2_allow_collect_calls=no
mfcr2_double_answer=no
mfcr2_immediate_accept=no
mfcr2_forced_release=no
mfcr2_charge_calls=yes
language=pt_BR
echocancel=yes
echocancelwhenbridged=no
context=e1
callgroup=0
pickupgroup=0
group=1
channel=>1-15



I thank you in advance for help.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20140516/73d1133d/attachment.html>