[asterisk-r2] A-6 signal used if mfcr2_variant=br

[Melcon Moraes]

dahdi show channel X will show you what options are in place, where X is
the channel number, like 1 or 2 etc.

-
MM

On Fri, May 25, 2012 at 3:36 AM, <fred.madison at gmx.net> wrote:

>  Hi Moy, Ricardo,
>
> Thanks for your feedback.
>
> I would like to add two comments:
> - I have two Asterisk systems connected over R2 for testing reasons. So
> both inbound and outbound parties are Asterisk. They have identical
> chan_dahdi.conf files.
> - the signal sent ist B-6, not A-6: the second last signal sent by the
> inbound Asterisk is an A-3, which changes to reception of Group B. so the
> last '6' sent is B-6 and not A-6 I guess.
>
> concerning immediate_accept: in dahdi_chan.conf, immediate_accept has the
> following state:
> ;mfcr2_immediate_accept=no. (commented with ;). does this mean that it is
> enabled?
>
> many thanks,
> Martin
>
> -------- Original-Nachricht --------
> Datum: Thu, 24 May 2012 22:52:18 -0400
> Von: Mc GRATH Ricardo <mcgrathr at mail2web.com>
> An: "asterisk-r2 at lists.digium.com" <asterisk-r2 at lists.digium.com>
> Betreff: Re: [asterisk-r2] A-6 signal used if mfcr2_variant=br
>
>  Hi Martin
> It's look confuse, because I understand  sequence for inbound call should
> be incoming to Asterisk?
> By the other way A-6 (address complete connect speech) it contemplated
> when PSTN routing call to old switching system, by the way it should be
> with some dial routing.
>  Mc GRATH Ricardo
> E-Mail mcgrathr at mail2web.com<https://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=10548622&t=de604797367.1337927127.c2e8e505&to=mcgrathr%40mail2web.com>
>
>  ------------------------------
> *From:* asterisk-r2-bounces at lists.digium.com<https://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=10548622&t=de604797367.1337927127.c2e8e505&to=asterisk-r2-bounces%40lists.digium.com>[
> asterisk-r2-bounces at lists.digium.com]<https://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=10548622&t=de604797367.1337927127.c2e8e505&to=asterisk-r2-bounces%40lists.digium.com>On Behalf Of
> fred.madison at gmx.net<https://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=10548622&t=de604797367.1337927127.c2e8e505&to=fred.madison%40gmx.net>[
> fred.madison at gmx.net]<https://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=10548622&t=de604797367.1337927127.c2e8e505&to=fred.madison%40gmx.net>
> *Sent:* 24 May 2012 08:45
> *To:* asterisk-r2 at lists.digium.com<https://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=10548622&t=de604797367.1337927127.c2e8e505&to=asterisk-r2%40lists.digium.com>
> *Subject:* [asterisk-r2] A-6 signal used if mfcr2_variant=br
>
>
> Hi,
>
> In my chan_dahdi.conf, I have 'mfcr2_variant=br'. If I analyze the
> compelling sequence for inbound calls, I see that the last signal sent is
> A-6, which should not be used in Brazilian R2.
>
> Could somebody enlight me on this?
>
> many thanks!
> Martin
>
>
>
> --
> Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
> belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
>
>
>
>
> --
> Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
> belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120525/1892faf4/attachment.htm>