[asterisk-r2] caso extraño MFCR/R2 Venezuela

Tue Apr 10 12:02:29 CDT 2012

My 5 cents to the issue: ...en la configuracion que mandaste original
no defines todos los parametros por cada grupo y como puedes ver en el
ejemplo que te mandan tienes que definir en cada grupo todos los
parametros necesarios.

Saludos / Regards
Sebastian Peschko

On 10/04/2012, at 11:56, Yuliesky Bello <yulitico at gmail.com> wrote:

> Muchas gracias por sus respuestas, realizare las pruebas y se los hare saber
>
> Rahib que estas usando especificamente? alguna version de elastix?
>
> saludos
>
> El día 10 de abril de 2012 12:15, Carlos Andrés Tapasco Viera
> <ctapasco at opengroupsa.com> escribió:
>> Probaste la variante ITU en vez de VE?, en Colombia tuve un problema similar
>> y lo resolví con la variante.
>>
>> El 10 de abril de 2012 11:42, Rabih R. Bou Orm A. <rabihbouorm at gmail.com>
>> escribió:
>>
>>> Yuliesky,
>>>
>>> A esto me refería yo:
>>>
>>> group=1
>>> signalling=mfcr2
>>> mfcr2_variant=ve
>>> mfcr2_get_ani_first=yes
>>> mfcr2_immediate_accept=no
>>> mfcr2_max_ani=10
>>> mfcr2_max_dnis=4
>>> mfcr2_category=national_subscriber
>>> mfcr2_logdir=cantv
>>> mfcr2_logging=all
>>> channel => 1-15
>>> ;CANTV ENTRANTE GRUPO1
>>>
>>>
>>> group=2
>>> signalling=mfcr2
>>> mfcr2_variant=ve
>>> mfcr2_dtmf_detection=1
>>> mfcr2_dtmf_dialing=1
>>> mfcr2_get_ani_first=yes
>>> mfcr2_immediate_accept=yes
>>> mfcr2_max_ani=10
>>> mfcr2_max_dnis=4
>>> mfcr2_category=national_subscriber
>>> mfcr2_logdir=cantv
>>> mfcr2_logging=all
>>> mfcr2_mfback_timeout=-1
>>> channel => 17-31
>>> ;CANTV SALIENTE GRUPO 2
>>>
>>> Asi me andan perfectamente.
>>> Saludos,
>>> Rabih Bou
>>>
>>> El 10 de abril de 2012 12:07, Luis Morales <fastonion at gmail.com> escribió:
>>>
>>>> Estimado,
>>>>
>>>> Creo que por el comportamiento que reportas te instalaron MFCR2 tanto
>>>> para entrantes como salientes.
>>>>
>>>> Configura el pool completo como mfcr2 y nos avisas los resultados,
>>>>
>>>> Saludos,
>>>>
>>>>
>>>> 2012/4/10 Yuliesky Bello <yulitico at gmail.com>:
>>>>> Buen dia, estoy usando asterisk 1.6 con el parche aplicado, estoy
>>>>> usando mfc-r2 para los primeros 15 entrantes y dtmf-r2 para los 15
>>>>> salientes, me funcionan las salientes pero solo cuando el el fichero
>>>>> dahdi_channel comento la linea de los canales entrantes, por ejemplo:
>>>>>
>>>>> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>>>>
>>>>> group=2
>>>>> context=from-pstn
>>>>> signalling=mfcr2
>>>>> mfcr2_variant=ve
>>>>> mfcr2_get_ani_first=yes
>>>>> mfcr2_immediate_accept=yes
>>>>> mfcr2_max_ani=10
>>>>> mfcr2_max_dnis=4
>>>>> mfcr2_category=national_subscriber
>>>>> mfcr2_logging=all
>>>>> mfcr2_metering_pulse_timeout=-1
>>>>> mfcr2_allow_collect_calls=yes
>>>>> mfcr2_charge_calls=yes
>>>>> mfcr2_mfback_timeout=-1
>>>>> mfcr2_dtmf_detection=no
>>>>> mfcr2_dtmf_dialing=no
>>>>> ;channel => 1-15     con esta linea comentada las llamadas salientes
>>>>> funcionan sin problemas, sin embargo no me funcionan las entrantes, y
>>>>> cuando descomento esta linea funcionan las entrantes pero las
>>>>> salientes dejan de funcionar.
>>>>>
>>>>> group=0
>>>>>
>>>>> mfcr2_dtmf_detection=yes
>>>>> mfcr2_dtmf_dialing=yes
>>>>> channel => 17-31
>>>>>
>>>>> El día 9 de abril de 2012 15:32, Ettore Pelliccioni
>>>>> <ettore.pelliccioni at techniclite.com> escribió:
>>>>>> Hola.
>>>>>>
>>>>>> La sintaxis cuando el E1 es fraccionado tiene sus detalles, prueba
>>>>>> hacer un mfcr2 show channels, para que veas cuales canales han tomado los
>>>>>> valores apropiados.
>>>>>>
>>>>>> El dnis y ani no debe es igual en ambos casos.
>>>>>>
>>>>>> Tambien puedes probar ocupar un canal particular con la herramienta
>>>>>> r2test.
>>>>>>
>>>>>> Saludos y suerte.
>>>>>>
>>>>>> Atentamente,
>>>>>> Ing. Ettore Eliseo Pelliccioni Monrroy
>>>>>>
>>>>>> Tlf.:+58.212.7626555
>>>>>> Móvil:+58.414.1111330
>>>>>> Skype:ettore.pelliccioni
>>>>>> eMail/msn: ettore.pelliccioni at techniclite.com
>>>>>> Web site: www.techniclite.com
>>>>>>
>>>>>>
>>>>>> This message may contain confidential information or privileged
>>>>>> material, and is intended only for the individual(s) named. If you are not
>>>>>> in the named address you should not disseminate, distribute or copy this
>>>>>> e-mail. Please notify the sender immediately by e-mail if you have received
>>>>>> this e-mail by mistake and delete this e-mail from your system.
>>>>>> E-mail transmission cannot be guaranteed to be secure or error-free as
>>>>>> information could be intercepted, corrupted, lost, destroyed, arrive late or
>>>>>> incomplete, or contain viruses. The sender therefore does not accept
>>>>>> liability for any errors or omissions in the contents of this message which
>>>>>> arise as a result of e-mail transmission. If verification is required please
>>>>>> request a hard-copy version.
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Yuliesky Bello <yulitico at gmail.com>
>>>>>> Sender: asterisk-r2-bounces at lists.digium.com
>>>>>> Date: Mon, 9 Apr 2012 14:28:59
>>>>>> To: <asterisk-r2 at lists.digium.com>
>>>>>> Reply-To: asterisk-r2 at lists.digium.com
>>>>>> Subject: [asterisk-r2] caso extraño MFCR/R2 Venezuela
>>>>>>
>>>>>> Hola
>>>>>>
>>>>>> Tengo configurado un enlace E1 con 15 entrantes y 15 salientes, a
>>>>>> continuación la configuración de los archivos:
>>>>>>
>>>>>> 1-15 -> Entrantes (CANTV - Venezuela MFC-R2)
>>>>>> 17-31-> Salientes (CANTV - Venezuela DTMF-R2)
>>>>>> Tengo creados dos troncales zap
>>>>>>
>>>>>> system.conf
>>>>>>
>>>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>>>>> span=1,1,0,cas,hdb3
>>>>>> cas=1-15:1101
>>>>>> cas=17-31:1101
>>>>>> alaw=1-15,17-31
>>>>>> echocanceller=oslec,1-15,17-31
>>>>>>
>>>>>> dahdi_channel.conf
>>>>>>
>>>>>> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>>>>>
>>>>>> group=1
>>>>>> context=from-pstn
>>>>>> signalling=mfcr2
>>>>>> mfcr2_variant=ve
>>>>>> mfcr2_get_ani_first=yes
>>>>>> mfcr2_immediate_accept=yes
>>>>>> mfcr2_max_ani=10
>>>>>> mfcr2_max_dnis=4
>>>>>> mfcr2_category=national_subscriber
>>>>>> mfcr2_logging=all
>>>>>> mfcr2_metering_pulse_timeout=-1
>>>>>> mfcr2_allow_collect_calls=yes
>>>>>> mfcr2_charge_calls=yes
>>>>>> mfcr2_mfback_timeout=-1
>>>>>> channel => 1-15
>>>>>>
>>>>>> group=0
>>>>>>
>>>>>> mfcr2_dtmf_detection=1
>>>>>> mfcr2_dtmf_dialing=1
>>>>>> channel => 17-31
>>>>>>
>>>>>> Ahora se me da un caso muy extraño, con este esquema las llamadas
>>>>>> entrantes funcionan sin problemas, pero no las salientes, ahora cuando
>>>>>> comento la linea channel => 1-15, las llamadas salientes se efectúan
>>>>>> sin ningún problema, pero con la linea comentada no puedo hacer
>>>>>> llamadas entrantes.
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>>
>>>>>> asterisk-r2 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>>
>>>>>> asterisk-r2 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Saludos.
>>>>>
>>>>> Ing. Yuliesky Bello Chávez.
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> ---------------------------------------------------------------------------------
>>>> Luis Morales
>>>> Consultor de Tecnologia
>>>> Cel: +58(0412)2352745
>>>> OpenID: http://lmorales.myopenid.com/
>>>> Twitter: @magnadata
>>>> Linux User ID : 470650
>>>>
>>>> ---------------------------------------------------------------------------------
>>>> "Empieza por hacer lo necesario, luego lo que es posible... y de
>>>> pronto estarás haciendo lo imposible"
>>>>
>>>> Leonardo Da'Vinci
>>>>
>>>> ---------------------------------------------------------------------------------
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>>
>> --
>> Carlos Andrés Tapasco Viera
>> Junior Telecommunications Engineer
>> Open Group Desarrollos Tecnológicos
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> --
> Saludos.
>
> Ing. Yuliesky Bello Chávez.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2