[asterisk-r2] pueden funcionar libpri y openr2 al mismo tiempo??

[Bryce Chidester]

Jam,
I  can't comment on the R2 interface, but the CB24 should not be. It depends
on which digital signaling the CB24 is set for, but for the "standard" LOOP,
you should see A=0, B=1, C=0, D=1 in idle state.
What do you see?
What signaling is set?
What do you see on the CB24 screen when this is happening (e.g. B in the RX
row, B in the TX row)?

Regards,
Bryce Chidester
Rhino Equipment
bryce at rhinoequipment.com





On Sat, Oct 15, 2011 at 07:37, jam <johans.a at gmail.com> wrote:

> Greetings, thank you very much for your assistance. to follow your advice everything
> works,now another question, without making or receiving calls CAS bits are
>  changing, what I see in the dahdi_tool. Is this normal?
>
> 2011/10/12 Bryce Chidester <brycec at rhinoequipment.com>
>
>> 2011/10/12 jam <johans.a at gmail.com>
>>
>>> Please, do you have some tips o configurations samples for this?
>>>
>>> El 12 de octubre de 2011 20:01, Bryce Chidester <
>>> brycec at rhinoequipment.com> escribió:
>>>
>>> 2011/10/12 jam <johans.a at gmail.com>
>>>>
>>>>> Saludos lista estoy en la siguiente situacion: Tengo un enlace E1 aca
>>>>> en Venezuela con R2, por lo que uso  OPENR2, todo ok hasta aca, pero ahora
>>>>> tengo que integrar unos Channels banks Rhino CBS de 24 FXS, estos equipos
>>>>> solo hablan sobre T1 por lo que mi poca experiencia me dice que tengo que
>>>>> usar Libpri para ponerlos en funcionamiento. mi duda es, los puedo instalar
>>>>> ambos? o mas importate aun, funcianan ambos al mismo tiempo en la misa pbx?
>>>>> alguien lo ha echo?..
>>>>>
>>>>> --
>>>>> ADS. Johans Angulo.
>>>>> CCNA CSC011350315
>>>>> Telf. 04265586486
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>
>>>>
>>>>
>>>> Actually Johans,
>>>> The Rhino CB24 does not require libpri. The CB24 is robbed-bit/CAS, just
>>>> like R2, but all the signaling is done in the signaling bits. There is no
>>>> need for libpri.
>>>>
>>>> (Google Translate back to Spanish)
>>>> El CB24 Rhino no requiere libpri. El CB24 es robbed-bit/CAS, al igual
>>>> que R2, pero todas las señales se realiza en los bits de señalización. No
>>>> hay necesidad de libpri.
>>>>
>>>> Regards,
>>>> Bryce Chidester
>>>> Rhino Equipment
>>>> bryce at rhinoequipment.com
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>>
>>> --
>>> ADS. Johans Angulo.
>>> CCNA CSC011350315
>>> Telf. 04265586486
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>> It should be relatively straight-forward. Be sure your T1 card is
>> configured in T1 mode for the CB24 port. Your zaptel.conf/system.conf would
>> then add an entry for the CB24FXS that looks like
>> span=2,0,0,esf,b8zs
>> fxoks=33-56
>> The above assumes the CB24FXS is on span 2.
>> You would add something like this do your zapata.conf/chan_dahdi.conf
>> signalling = fxo_ks
>> channel => 33-56
>> You would naturally need to set the proper context= etc lines to fit your
>> dialplan.
>>
>>
>> Regards,
>> Bryce Chidester
>> Rhino Equipment
>> bryce at rhinoequipment.com
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
>
> --
> ADS. Johans Angulo.
> CCNA CSC011350315
> Telf. 04265586486
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20111015/0e0698db/attachment.htm>