[asterisk-r2] pueden funcionar libpri y openr2 al mismo tiempo??

[jam]

Greetings, thank you very much for your assistance. to follow your
advice everything
works,now another question, without making or receiving calls CAS bits are
changing, what I see in the dahdi_tool. Is this normal?
2011/10/12 Bryce Chidester <brycec at rhinoequipment.com>

> 2011/10/12 jam <johans.a at gmail.com>
>
>> Please, do you have some tips o configurations samples for this?
>>
>> El 12 de octubre de 2011 20:01, Bryce Chidester <
>> brycec at rhinoequipment.com> escribió:
>>
>> 2011/10/12 jam <johans.a at gmail.com>
>>>
>>>> Saludos lista estoy en la siguiente situacion: Tengo un enlace E1 aca
>>>> en Venezuela con R2, por lo que uso  OPENR2, todo ok hasta aca, pero ahora
>>>> tengo que integrar unos Channels banks Rhino CBS de 24 FXS, estos equipos
>>>> solo hablan sobre T1 por lo que mi poca experiencia me dice que tengo que
>>>> usar Libpri para ponerlos en funcionamiento. mi duda es, los puedo instalar
>>>> ambos? o mas importate aun, funcianan ambos al mismo tiempo en la misa pbx?
>>>> alguien lo ha echo?..
>>>>
>>>> --
>>>> ADS. Johans Angulo.
>>>> CCNA CSC011350315
>>>> Telf. 04265586486
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>>
>>> Actually Johans,
>>> The Rhino CB24 does not require libpri. The CB24 is robbed-bit/CAS, just
>>> like R2, but all the signaling is done in the signaling bits. There is no
>>> need for libpri.
>>>
>>> (Google Translate back to Spanish)
>>> El CB24 Rhino no requiere libpri. El CB24 es robbed-bit/CAS, al igual
>>> que R2, pero todas las señales se realiza en los bits de señalización. No
>>> hay necesidad de libpri.
>>>
>>> Regards,
>>> Bryce Chidester
>>> Rhino Equipment
>>> bryce at rhinoequipment.com
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>>
>> --
>> ADS. Johans Angulo.
>> CCNA CSC011350315
>> Telf. 04265586486
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
> It should be relatively straight-forward. Be sure your T1 card is
> configured in T1 mode for the CB24 port. Your zaptel.conf/system.conf would
> then add an entry for the CB24FXS that looks like
> span=2,0,0,esf,b8zs
> fxoks=33-56
> The above assumes the CB24FXS is on span 2.
> You would add something like this do your zapata.conf/chan_dahdi.conf
> signalling = fxo_ks
> channel => 33-56
> You would naturally need to set the proper context= etc lines to fit your
> dialplan.
>
>
> Regards,
> Bryce Chidester
> Rhino Equipment
> bryce at rhinoequipment.com
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
ADS. Johans Angulo.
CCNA CSC011350315
Telf. 04265586486
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20111015/05f62227/attachment.htm>