[asterisk-r2] Random channels receive BLOCK Rx CAS after each wanrouter restart

[Moises Silva]

You are on a quite old version of wanpipe, several RBS related bugs
were fixed after that. Can you upgrade?

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON
L3R 9R6 Canada
t. 1 905 474 1990 x128 | e. moy at sangoma.com



On Wed, Feb 2, 2011 at 10:37 PM, Christian Cabrera <ccabrera at gmail.com> wrote:
> Hello,
> One of my customers is experiencing something really weird: at bootup,
> random channels from his E1 appears with a RxC CAS of "BLOCK". If I restart
> wanrouter, then the channels randomly switch but we never get the 30
> channels as IDLE at the same time.
> System was working fine, then they reported some noise was getting into the
> lines. Now the E1 won't even take calls. I've posted a pastebin of what the
> dahdi_tool looks like after restarting wanrouter several times (each time
> channels get random block/idle status). The url
> is http://pastebin.com/xGB3XCTE
> The specs of what I'm using:
> Asterisk 1.4.36
> Dahdi 2.4.0
> Wanpipe 3.5.8
> Sangoma AFT-A101c  : SLOT=0 : BUS=48 : IRQ=177 : CPU=A : PORT=PRI : V=25
> E1 is from Axtel
> Ballum has been changed to dismiss the chance of that being the problem.
> Dahdi_tool reports no alarms and when trying to dial out, a timeout occur (I
> can see the mfcr2 debug in the console and I get no ring on the destination
> phone).
> As a side note: the E1 gets conencted into an standard PBX and works fine:
> no noise nor anything bad happens. As soon as I get it into Asterisk, weird
> things start to happen.
> Could the card have gone bad? Let me know what can I do to debug as for
> obvious reasons the E1 stays connected into the Alcatel during all work
> hours.
> Regards,
>    Christian Cabrera
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>