[asterisk-r2] MFCR2 - CAS Seize or 0x00 when apply changes on freepbx .

[Moises Silva]

My advice would be upgrade openr2 and asterisk to 1.6.2 (not sure what
asterisknow 1.7 is), this may be already fixed. This kind of problems
are very hard to troubleshoot.

On Tue, Aug 30, 2011 at 10:40 AM, Marcio Oliveira <bymarcrj at gmail.com> wrote:
>
>   Hi ,
>
>   I have a system up and running , integrated with legacy PBX Nec Neax 2000
> . I'm using asterisknow 1.7 , a digium card TE407P ( E1 ) and openr2 1.2 (
> native from asterisknow ) in Brazil .
>
>   The only issue i have is :
>
>    - When i apply changes on freepbx ( create an extensios ) and reload it
> ,my channels get Seize and the only way to back this to the normal state ,
> Idle , is restart asterisk ( tx channels get back to Idle but RX are 0x00 )
> and then disconnect the cable from balun and connect again . After do this
> all channels get back to idle state and i'm able to make and receive calls .
>
>   So , do you have an idea about how to fix this ?.
>
>    Thanks in advance !
>
>      Marcio .
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>