[asterisk-r2] FW: te122p con E1 telecom conmutado
omar ivan perez vargas
o_i_p_v at hotmail.com
Fri Mar 5 12:13:34 CST 2010
Ok reinicie zaptel y asterisk y ahora hace lo siguinte:
Cuando entra una llamada sale:
voip*CLI>
MFC/R2 UniCall/1 <- 0001 [1/IDLE /Idle /Idle ]
MFC/R2 UniCall/1 Detected
MFC/R2 UniCall/1 Creating a new call with CRN 32770
MFC/R2 UniCall/1 1101 -> [2/DETECTED/Seize ack /Seize ack ]
[Mar 5 13:11:26] NOTICE[5365]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Detected
MFC/R2 UniCall/1 <- 5 on [2/DETECTED/Seize ack /Seize ack ]
MFC/R2 UniCall/1 6 on -> [2/DETECTED/Group A /Category req ]
MFC/R2 UniCall/1 <- 5 off [2/DETECTED/Group A /Category req ]
MFC/R2 UniCall/1 Channel flush
MFC/R2 UniCall/1 6 off -> [2/DETECTED/Group A /Category req ]
MFC/R2 UniCall/1 R2 prot. err. [2/DETECTED/Group A /Category req ] cause 32771 - T3 timed out
MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]
[Mar 5 13:11:41] NOTICE[5365]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Protocol failure
[Mar 5 13:11:41] ERROR[5365]: chan_unicall.c:2522 handle_uc_event: Unicall/1 protocol error. Cause 32771
MFC/R2 UniCall/1 Channel echo cancel
MFC/R2 UniCall/1 <- 1001 [1/IDLE /Idle /Idle ]
MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]
voip*CLI>
y cuando trato de sacar llamada me sale:
voip*CLI>
-- Executing [95101652 at L-DDN-DDI-CEL:1] Dial("SIP/100-c0001240", "Unicall/g1/5101652") in new stack
MFC/R2 UniCall/1 Call control(1)
MFC/R2 UniCall/1 Make call
MFC/R2 UniCall/1 Creating a new call with CRN 32769
MFC/R2 UniCall/1 0001 -> [1/DIALING /Seize /Idle ]
-- Called g1/5101652
[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Dialing
[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:1914 unicall_exception: Exception on 25, channel 1
MFC/R2 UniCall/1 <- 1101 [1/DIALING /Seize /Idle ]
MFC/R2 UniCall/1 5 on -> [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 <- 1 on [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 Channel flush
MFC/R2 UniCall/1 5 off -> [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 <- 1 off [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 1 on -> [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 <- 1 on [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 Channel flush
MFC/R2 UniCall/1 1 off -> [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 <- 1 off [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 0 on -> [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 <- 5 on [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 Channel flush
MFC/R2 UniCall/1 0 off -> [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 <- 5 off [2/DIALING /Group I /DNIS ]
MFC/R2 UniCall/1 R2 prot. err. [2/DIALING /Group I /DNIS ] cause 32772 - Unexpected MF6 signal
MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]
[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Protocol failure
[Mar 5 13:10:31] ERROR[5371]: chan_unicall.c:2522 handle_uc_event: Unicall/1 protocol error. Cause 32772
MFC/R2 UniCall/1 Channel echo cancel
MFC/R2 UniCall/1 Channel gains
MFC/R2 UniCall/1 Channel switching
-- Hungup 'UniCall/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [95101652 at L-DDN-DDI-CEL:2] Hangup("SIP/100-c0001240", "") in new stack
== Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c0001240'
MFC/R2 UniCall/1 <- 1001 [1/IDLE /Idle /Idle ]
MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]
voip*CLI>
que sera?
op
From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Subject: FW: [asterisk-r2] FW: te122p con E1 telecom conmutado
Date: Fri, 5 Mar 2010 13:08:17 -0500
y cuando trato de marcar por el canal me sale:
voip*CLI>
-- Executing [95101652 at L-DDN-DDI-CEL:1] Dial("SIP/100-c4003530", "Unicall/g1/5101652") in new stack
[Mar 5 13:07:17] WARNING[4661]: app_dial.c:1183 dial_exec_full: Unable to create channel of type 'Unicall' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [95101652 at L-DDN-DDI-CEL:2] Hangup("SIP/100-c4003530", "") in new stack
== Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c4003530'
voip*CLI>
Op
From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Date: Fri, 5 Mar 2010 13:06:11 -0500
Subject: [asterisk-r2] FW: te122p con E1 telecom conmutado
Hola
Bueno les cuento que en el balun conecte al contrario el rx y el tx y la tarjeta se coloco en verde...
ahora me salen:
[Mar 5 13:03:08] ERROR[4529]: chan_unicall.c:2522 handle_uc_event: Unicall/28 protocol error. Cause 32773
MFC/R2 UniCall/29 <- 0100 [1/BLOCKED /Idle /Idle ]
MFC/R2 UniCall/29 R2 prot. err. [1/BLOCKED /Idle /Idle ] cause 32773 - Unexpected CAS bit pattern
MFC/R2 UniCall/29 1001 -> [1/BLOCKED /Idle /Idle ]
que significa esto???
gracias
Omar
From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado
Date: Fri, 5 Mar 2010 12:27:06 -0500
Mi configuracion
From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado
Date: Fri, 5 Mar 2010 11:47:55 -0500
Pues le cuento:
El canal esta actualmente conectado a una planta Alcatel OmniPCX y esta funcionando
el cable UTP sale del balun y entra al puerto de la Alcatel donde dice PBX
ese mismo cable es el que uso para conectar a mi tarjeta
Mi configuracion es:
zaptel.conf
# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)
span=1,1,0,cas,hdb3
# termtype: te
cas=1-15:1101
#dchan=16
cas=17-31:1101
# Span 2: WCTDM/0 "Wildcard AEX410 Board 1"
fxsks=32
fxsks=33
fxsks=34
fxsks=35
# Global data
loadzone = us
defaultzone = us
unicall.conf
[channels]
language=es
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
protocolclass=mfcr2
; protocolvariant=co-land,30,1,16
protocolvariant=co-land,30,7,16
protocolend=cpe
group = 1
loglevel = 255
context= from-pstn
channel => 1-15
channel => 17-31
;skip time slot 16
extensions.conf
[from-pstn]
exten=>_.,1,Answer()
exten=>_.,n,Goto(ivr,s,1)
exten=>_.,n,Hangup
exten=>9260,1,Answer()
exten=>9260,n,Goto(ivr,s,1)
exten=>9260,n,Hangup
Tengo entendido q en el zapata.conf no se coloca nada del E1 pero aca les mando:
[trunkgroups]
[channels]
language=es
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
faxdetect=incoming
busydetect=yes
busycount=4
; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)
;group=1
;context=from-pstn
;switchtype = euroisdn
;signalling = pri_cpe
;channel => 1-31
; Span 2: WCTDM/0 "Wildcard AEX410 Board 1"
;;; line="32 WCTDM/0/0 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 32
;;; line="33 WCTDM/0/1 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 33
;;; line="34 WCTDM/0/2 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 34
;;; line="35 WCTDM/0/3 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 35
gracias
Op
Discover the new Windows Vista Learn more!
Explore the seven wonders of the world Learn more!
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it!
Connect to the next generation of MSN Messenger Get it now!
_________________________________________________________________
Discover the new Windows Vista
http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100305/494dc693/attachment-0001.htm
More information about the asterisk-r2
mailing list