<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Verdana
}
--></style>
</head>
<body class='hmmessage'>
Ok reinicie zaptel y asterisk y ahora hace lo siguinte:<BR>
<BR>
<BR>
Cuando entra una llamada sale:<BR>
<BR>
<BR>
voip*CLI><BR>MFC/R2 UniCall/1 <- 0001 [1/IDLE /Idle /Idle ]<BR>MFC/R2 UniCall/1 Detected<BR>MFC/R2 UniCall/1 Creating a new call with CRN 32770<BR>MFC/R2 UniCall/1 1101 -> [2/DETECTED/Seize ack /Seize ack ]<BR>[Mar 5 13:11:26] NOTICE[5365]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Detected<BR>MFC/R2 UniCall/1 <- 5 on [2/DETECTED/Seize ack /Seize ack ]<BR>MFC/R2 UniCall/1 6 on -> [2/DETECTED/Group A /Category req ]<BR>MFC/R2 UniCall/1 <- 5 off [2/DETECTED/Group A /Category req ]<BR>MFC/R2 UniCall/1 Channel flush<BR>MFC/R2 UniCall/1 6 off -> [2/DETECTED/Group A /Category req ]<BR>MFC/R2 UniCall/1 R2 prot. err. [2/DETECTED/Group A /Category req ] cause 32771 - T3 timed out<BR>MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<BR>[Mar 5 13:11:41] NOTICE[5365]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Protocol failure<BR>[Mar 5 13:11:41] ERROR[5365]: chan_unicall.c:2522 handle_uc_event: Unicall/1 protocol error. Cause 32771<BR>MFC/R2 UniCall/1 Channel echo cancel<BR>MFC/R2 UniCall/1 <- 1001 [1/IDLE /Idle /Idle ]<BR>MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<BR>voip*CLI><BR><BR>
<BR>
<BR>
<BR>
y cuando trato de sacar llamada me sale:<BR>
<BR>
<BR>
<BR>
voip*CLI><BR> -- Executing [95101652@L-DDN-DDI-CEL:1] Dial("SIP/100-c0001240", "Unicall/g1/5101652") in new stack<BR>MFC/R2 UniCall/1 Call control(1)<BR>MFC/R2 UniCall/1 Make call<BR>MFC/R2 UniCall/1 Creating a new call with CRN 32769<BR>MFC/R2 UniCall/1 0001 -> [1/DIALING /Seize /Idle ]<BR> -- Called g1/5101652<BR>[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Dialing<BR>[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:1914 unicall_exception: Exception on 25, channel 1<BR>MFC/R2 UniCall/1 <- 1101 [1/DIALING /Seize /Idle ]<BR>MFC/R2 UniCall/1 5 on -> [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 <- 1 on [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 Channel flush<BR>MFC/R2 UniCall/1 5 off -> [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 <- 1 off [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 1 on -> [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 <- 1 on [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 Channel flush<BR>MFC/R2 UniCall/1 1 off -> [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 <- 1 off [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 0 on -> [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 <- 5 on [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 Channel flush<BR>MFC/R2 UniCall/1 0 off -> [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 <- 5 off [2/DIALING /Group I /DNIS ]<BR>MFC/R2 UniCall/1 R2 prot. err. [2/DIALING /Group I /DNIS ] cause 32772 - Unexpected MF6 signal<BR>MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<BR>[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Protocol failure<BR>[Mar 5 13:10:31] ERROR[5371]: chan_unicall.c:2522 handle_uc_event: Unicall/1 protocol error. Cause 32772<BR>MFC/R2 UniCall/1 Channel echo cancel<BR>MFC/R2 UniCall/1 Channel gains<BR>MFC/R2 UniCall/1 Channel switching<BR> -- Hungup 'UniCall/1-1'<BR> == Everyone is busy/congested at this time (1:0/0/1)<BR> -- Executing [95101652@L-DDN-DDI-CEL:2] Hangup("SIP/100-c0001240", "") in new stack<BR> == Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c0001240'<BR>MFC/R2 UniCall/1 <- 1001 [1/IDLE /Idle /Idle ]<BR>MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<BR>voip*CLI><BR><BR>
<BR>
<BR>
que sera?<BR>
<BR>
op<BR>
<BR>
<BR>
<BR> <BR>
<HR id=stopSpelling>
From: o_i_p_v@hotmail.com<BR>To: asterisk-r2@lists.digium.com<BR>Subject: FW: [asterisk-r2] FW: te122p con E1 telecom conmutado<BR>Date: Fri, 5 Mar 2010 13:08:17 -0500<BR><BR>
<STYLE>
.ExternalClass .ecxhmmessage P
{padding:0px;}
.ExternalClass body.ecxhmmessage
{font-size:10pt;font-family:Verdana;}
</STYLE>
y cuando trato de marcar por el canal me sale:<BR> <BR>voip*CLI><BR> -- Executing [95101652@L-DDN-DDI-CEL:1] Dial("SIP/100-c4003530", "Unicall/g1/5101652") in new stack<BR>[Mar 5 13:07:17] WARNING[4661]: app_dial.c:1183 dial_exec_full: Unable to create channel of type 'Unicall' (cause 0 - Unknown)<BR> == Everyone is busy/congested at this time (1:0/0/1)<BR> -- Executing [95101652@L-DDN-DDI-CEL:2] Hangup("SIP/100-c4003530", "") in new stack<BR> == Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c4003530'<BR>voip*CLI><BR><BR> <BR>Op<BR> <BR>
<HR id=ecxstopSpelling>
From: o_i_p_v@hotmail.com<BR>To: asterisk-r2@lists.digium.com<BR>Date: Fri, 5 Mar 2010 13:06:11 -0500<BR>Subject: [asterisk-r2] FW: te122p con E1 telecom conmutado<BR><BR>
<STYLE>
.ExternalClass .ecxhmmessage P
{padding:0px;}
.ExternalClass body.ecxhmmessage
{font-size:10pt;font-family:Verdana;}
</STYLE>
Hola<BR> <BR>Bueno les cuento que en el balun conecte al contrario el rx y el tx y la tarjeta se coloco en verde...<BR> <BR>ahora me salen:<BR> <BR>[Mar 5 13:03:08] ERROR[4529]: chan_unicall.c:2522 handle_uc_event: Unicall/28 protocol error. Cause 32773<BR>MFC/R2 UniCall/29 <- 0100 [1/BLOCKED /Idle /Idle ]<BR>MFC/R2 UniCall/29 R2 prot. err. [1/BLOCKED /Idle /Idle ] cause 32773 - Unexpected CAS bit pattern<BR>MFC/R2 UniCall/29 1001 -> [1/BLOCKED /Idle /Idle ]<BR><BR> <BR>que significa esto???<BR> <BR>gracias<BR> <BR>Omar<BR> <BR>
<HR id=ecxecxstopSpelling>
From: o_i_p_v@hotmail.com<BR>To: asterisk-r2@lists.digium.com<BR>Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado<BR>Date: Fri, 5 Mar 2010 12:27:06 -0500<BR><BR>
<STYLE>
.ExternalClass .ecxhmmessage P
{padding:0px;}
.ExternalClass body.ecxhmmessage
{font-size:10pt;font-family:Verdana;}
</STYLE>
Mi configuracion<BR> <BR>
<HR id=ecxecxecxstopSpelling>
From: o_i_p_v@hotmail.com<BR>To: asterisk-r2@lists.digium.com<BR>Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado<BR>Date: Fri, 5 Mar 2010 11:47:55 -0500<BR><BR>
<STYLE>
.ExternalClass .ecxhmmessage P
{padding:0px;}
.ExternalClass body.ecxhmmessage
{font-size:10pt;font-family:Verdana;}
</STYLE>
<STYLE>
.ExternalClass .ecxhmmessage P
{padding:0px;}
.ExternalClass body.ecxhmmessage
{font-size:10pt;font-family:Verdana;}
</STYLE>
Pues le cuento:<BR>El canal esta actualmente conectado a una planta Alcatel OmniPCX y esta funcionando<BR>el cable UTP sale del balun y entra al puerto de la Alcatel donde dice PBX<BR>ese mismo cable es el que uso para conectar a mi tarjeta<BR>Mi configuracion es:<BR> <BR>zaptel.conf<BR> <BR># Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)<BR>span=1,1,0,cas,hdb3<BR># termtype: te<BR>cas=1-15:1101<BR>#dchan=16<BR>cas=17-31:1101<BR># Span 2: WCTDM/0 "Wildcard AEX410 Board 1"<BR>fxsks=32<BR>fxsks=33<BR>fxsks=34<BR>fxsks=35<BR># Global data<BR>loadzone = us<BR>defaultzone = us<BR><BR> <BR>unicall.conf<BR> <BR>[channels]<BR>language=es<BR>usecallerid=yes<BR>hidecallerid=no<BR>callwaitingcallerid=yes<BR>threewaycalling=yes<BR>transfer=yes<BR>cancallforward=yes<BR>callreturn=yes<BR>echocancel=yes<BR>echocancelwhenbridged=yes<BR>echotraining=yes<BR>rxgain=0.0<BR>txgain=0.0<BR>group=1<BR>callgroup=1<BR>pickupgroup=1<BR>immediate=no<BR>musiconhold=default<BR>protocolclass=mfcr2<BR>; protocolvariant=co-land,30,1,16<BR>protocolvariant=co-land,30,7,16<BR>protocolend=cpe<BR>group = 1<BR>loglevel = 255<BR>context= from-pstn<BR>channel => 1-15<BR>channel => 17-31<BR>;skip time slot 16<BR><BR> <BR>extensions.conf<BR> <BR>[from-pstn]<BR>exten=>_.,1,Answer()<BR>exten=>_.,n,Goto(ivr,s,1)<BR>exten=>_.,n,Hangup<BR> <BR>exten=>9260,1,Answer()<BR>exten=>9260,n,Goto(ivr,s,1)<BR>exten=>9260,n,Hangup<BR><BR>Tengo entendido q en el zapata.conf no se coloca nada del E1 pero aca les mando:<BR> <BR>[trunkgroups]<BR>[channels]<BR>language=es<BR>usecallerid=yes<BR>hidecallerid=no<BR>callwaiting=yes<BR>usecallingpres=yes<BR>callwaitingcallerid=yes<BR>threewaycalling=yes<BR>transfer=yes<BR>canpark=yes<BR>cancallforward=yes<BR>callreturn=yes<BR>echocancel=yes<BR>echocancelwhenbridged=yes<BR>relaxdtmf=yes<BR>rxgain=0.0<BR>txgain=0.0<BR>callgroup=1<BR>pickupgroup=1<BR>immediate=no<BR>faxdetect=incoming<BR>busydetect=yes<BR>busycount=4<BR><BR>; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)<BR>;group=1<BR>;context=from-pstn<BR>;switchtype = euroisdn<BR>;signalling = pri_cpe<BR>;channel => 1-31<BR>; Span 2: WCTDM/0 "Wildcard AEX410 Board 1"<BR>;;; line="32 WCTDM/0/0 RED"<BR>signalling=fxs_ks<BR>callerid=asreceived<BR>group=2<BR>context=from-pstn<BR>channel => 32<BR>;;; line="33 WCTDM/0/1 RED"<BR>signalling=fxs_ks<BR>callerid=asreceived<BR>group=2<BR>context=from-pstn<BR>channel => 33<BR>;;; line="34 WCTDM/0/2 RED"<BR>signalling=fxs_ks<BR>callerid=asreceived<BR>group=2<BR>context=from-pstn<BR>channel => 34<BR>;;; line="35 WCTDM/0/3 RED"<BR>signalling=fxs_ks<BR>callerid=asreceived<BR>group=2<BR>context=from-pstn<BR>channel => 35<BR><BR>gracias<BR> <BR>Op <BR>
<HR>
Discover the new Windows Vista <A href="http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE">Learn more!</A> <BR>
<HR>
Explore the seven wonders of the world <A href="http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE">Learn more!</A> <BR>
<HR>
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! <A href="http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us">Try it!</A> <BR>
<HR>
Connect to the next generation of MSN Messenger <A href="http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline">Get it now! </A> <br /><hr />Discover the new Windows Vista <a href='http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE' target='_new'>Learn more!</a></body>
</html>