[asterisk-r2] Problemas con un R2 y Avaya

Mon Jul 12 11:48:18 CDT 2010

Que tal. Si puedes usar ingles, es preferible. En esta lista no todos hablan
espaniol.

Lo primero es tomar un call file (el cual incluye un trazado del protocolo).
Lee la documentacion sobre mfcr2_call_files en chan_dahdi.conf y pega una
liga aqui al call file en pastebin.com

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com

On Mon, Jul 12, 2010 at 12:43 PM, Robert Juarez <jlroberto at gmail.com> wrote:

> Hola buenas me atrevo a mandarte un mail y contarte nuestras desgracias
> llevamos ya poco mas de un me con tratar de levantar un par de R2 uno que
> sera conectado a un avaya y otro directo a telemex,
>
> Hemos seguido paso a paso todas los tutos posibles uno por uno, al reves al
> derecho y nos es posible encontrar una solucion viable para ambos en estos
> momentos estamos haciendo pruebas con el r2 y el avaya y parece que estamos
> a punto ya de dar con el clavo pero nos ha esta dando una serie de errores
> que no sabemos de donde se origina,
>
> Tenemos configurado lo siguiente
> Elastix 2.0
> asterisk 1.6.2.6
> dahdi 2.2.1.1
> una tarjeta rhino T1E1 (al parecer configurada)
> cuando revisamos (dahdi_tool) configuracion todo esta OK y revisamos los
> canales nos da in service dahdi show channels desde la consola, pero si le
> damos mfcr2 shown channels nos da ilde
>
> nuestra configuracion system.conf
>
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> dchan=16
> cas=17-31:1101
>
> loadzone = mx
> defaultzone = mx
>
> chan_dahdi.conf
> [channels]
> context=from-pstn
> ;signalling=fxs_ks
> rxwink=300 ; Atlas seems to use long (250ms) winks
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> faxdetect=incoming
> echotraining=800
> rxgain=0.0
> txgain=0.0
> callgroup=1
> ;Uncomment these lines if you have problems with the disconection of your
> analog lines
> ;busydetect=yes
> ;busycount=3
>
> context=from-pstn
> group=0
> echocancel=yes
> signalling=mfcr2
> mfcr2_variant=mx
> mfcr2_get_ani_first=no
> mfcr2_max_ani=4
> mfcr2_max_dnis=4
> mfcr2_category=national_priority_subscriber
> ;mfcr2_category=national_subscriber
> mfcr2_mfback_timeout=-1
> mfcr2_metering_pulse_timeout=-1
> channel =>1-15,17-31
>
>
> hemos intentado de todo y por eso que es que envio este mail de soporte
> para ver si pueden ver algo que estemos haciendo mal
>
> esto es lo que nos manda de error
>
> [Jul 12 11:10:52] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 8
> [Jul 12 11:10:52] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 9
> [Jul 12 11:10:52] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 10
> [Jul 12 11:10:52] NOTICE[3497] chan_dahdi.c: Far end unblocked on chan 11
> [Jul 12 11:10:52] NOTICE[3497] chan_dahdi.c: Far end unblocked on chan 12
> [Jul 12 11:10:52] NOTICE[3497] chan_dahdi.c: Far end unblocked on chan 13
> [Jul 12 11:10:52] NOTICE[3497] chan_dahdi.c: Far end unblocked on chan 14
> [Jul 12 11:10:52] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 7
> [Jul 12 11:10:52] DEBUG[3550] chan_dahdi.c: bits changed in chan 3
> [Jul 12 11:10:53] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 4
> [Jul 12 11:10:53] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 5
> [Jul 12 11:10:53] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 6
> [Jul 12 11:10:53] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 1
> [Jul 12 11:10:54] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 2
> [Jul 12 11:10:54] DEBUG[3550] chan_dahdi.c: bits changed in chan 3
> [Jul 12 11:10:54] ERROR[3550] chan_dahdi.c: Chan 3 - Protocol error. Reason
> = Invalid CAS, R2 State = Seize ACK Received, MF state = DNIS Digit
> Transmitted, MF Group = Forward Group I, CAS = 0x08
> DNIS = 17994, ANI = 7997, MF = 0x20
> [Jul 12 11:10:54] ERROR[3550] chan_dahdi.c: MFC/R2 protocol error on chan
> 3: Invalid CAS
> [Jul 12 11:10:54] VERBOSE[3550] chan_dahdi.c:     -- Hungup 'DAHDI/3-1'
> [Jul 12 11:10:54] VERBOSE[3550] app_dial.c:   == Everyone is busy/congested
> at this time (1:0/0/1)
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Executing
> [s at macro-dialout-trunk:20] NoOp("SIP/7997-00000000", "Dial failed for some
> reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 111") in new stack
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Executing
> [s at macro-dialout-trunk:21] Goto("SIP/7997-00000000", "s-CHANUNAVAIL,1") in
> new stack
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Goto
> (macro-dialout-trunk,s-CHANUNAVAIL,1)
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Executing
> [s-CHANUNAVAIL at macro-dialout-trunk:1] Set("SIP/7997-00000000", "RC=111")
> in new stack
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Executing
> [s-CHANUNAVAIL at macro-dialout-trunk:2] Goto("SIP/7997-00000000", "111,1")
> in new stack
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Goto
> (macro-dialout-trunk,111,1)
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Executing
> [111 at macro-dialout-trunk:1] Goto("SIP/7997-00000000", "continue,1") in new
> stack
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Goto
> (macro-dialout-trunk,continue,1)
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Executing
> [continue at macro-dialout-trunk:1] GotoIf("SIP/7997-00000000", "1?noreport")
> in new stack
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Goto
> (macro-dialout-trunk,continue,3)
> [Jul 12 11:10:54] VERBOSE[3550] pbx.c:     -- Executing
> [continue at macro-dialout-trunk:3] NoOp("SIP/7997-00000000", "TRUNK Dial
> failed due to CHANUNAVAIL HANGUPCAUSE: 111 - failing through to other
> trunks") in new stack
>
>
> Un saludo
>
> Roberto Juarez
> Hoteles Sandos
> Playa del Carmen Q.Roo, Mexico
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100712/49b8f02b/attachment.htm 