[asterisk-r2] openR2 to a Panasonic PBX...

[Anton Krall]

Thx for the clarification Juan Carlos



> From: Juan Carlos Huerta <juancarloshuerta at gmail.com>
> Reply-To: <asterisk-r2 at lists.digium.com>
> Date: Fri, 22 Jan 2010 23:18:53 -0600
> To: <asterisk-r2 at lists.digium.com>
> Subject: Re: [asterisk-r2] openR2 to a Panasonic PBX...
> 
> The use of ANI before of after DNI depends on your carrier config. As
> I said, Maxcom sends ANI before DNI numbers, Telmex and other telcos
> sends DNI before ANI. If you want to turn off the waiting of DNI or
> ANI just set max_ani or max_dnis to zero.
> 
> skip_category is to not request the category tones to the calling party.
> 
> Refer to the chan_dadhdi.conf.sample for more information:
> http://svnview.digium.com/svn/asterisk/team/moy/mfcr2-1.4/configs/chan_dahdi.c
> onf.sample?view=markup
> 
> Juan Carlos
> ~ Lo que no te mata te fortalece ~
> 
> 
> 
> On Fri, Jan 22, 2010 at 8:46 PM, Anton Krall <antonkrall at gmail.com> wrote:
>> How about skip_category?
>> 
>> And when to use ani first? If you dont get ANI or DNIS and you are sure you
>> have callierid enabled? Switch them on/off?
>> 
>> 
>> 
>> From: Moises Silva <moises.silva at gmail.com>
>> Reply-To: <asterisk-r2 at lists.digium.com>
>> Date: Fri, 22 Jan 2010 20:00:15 -0500
>> To: <asterisk-r2 at lists.digium.com>
>> Subject: Re: [asterisk-r2] openR2 to a Panasonic PBX...
>> 
>> On Fri, Jan 22, 2010 at 7:39 PM, Juan Carlos Huerta
>> <juancarloshuerta at gmail.com> wrote:
>>> In mfcr2_allow_collect_calls is a feature we setup to pass the calls
>>> without problems to Panasonic PBX, I don't remember the exact reaseon
>>> right now, but is somethig about pass all the destiny digits, maybe
>>> Moy can help us to explain a little better :)
>> 
>> Well, the parameter is pretty self-explanatory, it will allow collect calls.
>> Telcos or PBX may send a special category saying that the call is a collect
>> call, you can accept it or reject it right away.
>> 
>> --
>> Moises Silva
>> Senior Software Engineer
>> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
>> Canada
>> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>> 
>> 
>>