[asterisk-r2] openR2 to a Panasonic PBX...

[Anton Krall]

How about skip_category?

And when to use ani first? If you dont get ANI or DNIS and you are sure you
have callierid enabled? Switch them on/off?



From: Moises Silva <moises.silva at gmail.com>
Reply-To: <asterisk-r2 at lists.digium.com>
Date: Fri, 22 Jan 2010 20:00:15 -0500
To: <asterisk-r2 at lists.digium.com>
Subject: Re: [asterisk-r2] openR2 to a Panasonic PBX...

On Fri, Jan 22, 2010 at 7:39 PM, Juan Carlos Huerta
<juancarloshuerta at gmail.com> wrote:
> In mfcr2_allow_collect_calls is a feature we setup to pass the calls
> without problems to Panasonic PBX, I don't remember the exact reaseon
> right now, but is somethig about pass all the destiny digits, maybe
> Moy can help us to explain a little better :)

Well, the parameter is pretty self-explanatory, it will allow collect calls.
Telcos or PBX may send a special category saying that the call is a collect
call, you can accept it or reject it right away.
 
-- 
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com