[asterisk-r2] MFC R2 Variant Venezuela using openR2
Madini Ladino
madinix at gmail.com
Fri Apr 23 19:14:05 CDT 2010
I checked carefully my configuration and everything is OK. My red alarm was
caused by a bad coaxial cable. I changed it and I finally got a green. Works
perfectly with incoming and outgoing calls.
Best regards,
On Tue, Mar 30, 2010 at 10:27 PM, <asterisk-r2-request at lists.digium.com>wrote:
> Send asterisk-r2 mailing list submissions to
> asterisk-r2 at lists.digium.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.digium.com/mailman/listinfo/asterisk-r2
> or, via email, send a message with subject or body 'help' to
> asterisk-r2-request at lists.digium.com
>
> You can reach the person managing the list at
> asterisk-r2-owner at lists.digium.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of asterisk-r2 digest..."
>
>
> Today's Topics:
>
> 1. r2 state unknown (Anton Krall)
> 2. MFC R2 Variant Venezuela using openR2 (Madini Ladino)
> 3. Re: MFC R2 Variant Venezuela using openR2 (Juan Carlos Huerta)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 30 Mar 2010 11:06:52 -0600
> From: Anton Krall <antonkrall at gmail.com>
> Subject: [asterisk-r2] r2 state unknown
> To: <asterisk-r2 at lists.digium.com>
> Message-ID: <C7D78BCC.B8811%antonkrall at gmail.com<C7D78BCC.B8811%25antonkrall at gmail.com>
> >
> Content-Type: text/plain; charset="US-ASCII"
>
> Guys.
>
> Im starting to see this:
>
> [Mar 30 10:27:31] ERROR[22019]: Chan 2 - Protocol error. Reason = Invalid
> R2
> state, R2 State = *Unknown*, MF state = MF Engine Off, MF Group = Backward
> Group B, CAS = 0x08
>
> This happends on many PBXs... Anybody in Mexico having the same issues?
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 30 Mar 2010 20:37:21 -0400
> From: Madini Ladino <madinix at gmail.com>
> Subject: [asterisk-r2] MFC R2 Variant Venezuela using openR2
> To: asterisk-r2 at lists.digium.com
> Message-ID:
> <b6d9e3551003301737p3b35289ct8db63b442120af8a at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I have problems with E1s R2 MFC (CANTV) in Venezuela. Using zttool I got
> Red
> Alarm.
>
> I'm using following versions:
>
> Asterisk 1.4.26.1
> *CLI> mfcr2 show version
> OpenR2 version: 1.2.0, revision: (release)
>
> My digium card is:
> pci:0000:0b:08.0 wct4xxp+ d161:0220 Wildcard TE220 (4th Gen)
>
> My /etc/zaptel.conf config is:
>
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> dchan=16
> bchan=17-31
> loadzone =es
> defaultzone=es
>
> span=2,1,0,cas,hdb3,crc4
> cas=32-46:1101
> dchan=47
> cas=48-62:1101
> loadzone =es
> defaultzone=es
>
> (span 1: I have a ISDN E1 (currently working), span 2: I have MFC R2 E1
> from CANTV)
>
>
> My /etc/zapata.conf
>
> group=4
> signalling=mfcr2
> mfcr2_variant=ve
> mfcr2_get_ani_first=no
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_category=national_subscriber
> mfcr2_mfback_timeout=-1
> mfcr2_metering_pulse_timeout=-1
> mfcr2_logdir=log
> mfcr2_logging=all
> channel => 32-46
> channel => 48-62
>
>
> Actually this R2 E1 is connected to a Nortel and works. When I connect to
> digium card I only got Red alarm. I'm using a balun to convert to RJ45.
>
> When I do zap restart I got:
>
> == Starting D-Channel on span 1
> == Starting R2 context on span 1
> == Starting R2 context on span 2
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 32
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 48
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 33
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 49
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 50
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 34
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 51
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 35
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 52
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 36
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 53
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:
> Far end blocked on chan 37
>
>
> When I run mfcr2 show channels I have:
>
> *CLI> mfcr2 show channels
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS
> 32 VE 10 4 No No IDLE BLOCK
> 33 VE 10 4 No No IDLE BLOCK
> 34 VE 10 4 No No IDLE BLOCK
> 35 VE 10 4 No No IDLE BLOCK
> 36 VE 10 4 No No IDLE BLOCK
> 37 VE 10 4 No No IDLE BLOCK
> 38 VE 10 4 No No IDLE BLOCK
> 39 VE 10 4 No No IDLE BLOCK
> 40 VE 10 4 No No IDLE BLOCK
> 41 VE 10 4 No No IDLE BLOCK
> 42 VE 10 4 No No IDLE BLOCK
> 43 VE 10 4 No No IDLE BLOCK
> 44 VE 10 4 No No IDLE BLOCK
> 45 VE 10 4 No No IDLE BLOCK
> 46 VE 10 4 No No IDLE BLOCK
> 48 VE 10 4 No No IDLE BLOCK
> 49 VE 10 4 No No IDLE BLOCK
> 50 VE 10 4 No No IDLE BLOCK
> 51 VE 10 4 No No IDLE BLOCK
> 52 VE 10 4 No No IDLE BLOCK
> 53 VE 10 4 No No IDLE BLOCK
> 54 VE 10 4 No No IDLE BLOCK
> 55 VE 10 4 No No IDLE BLOCK
> 56 VE 10 4 No No IDLE BLOCK
> 57 VE 10 4 No No IDLE BLOCK
> 58 VE 10 4 No No IDLE BLOCK
> 59 VE 10 4 No No IDLE BLOCK
> 60 VE 10 4 No No IDLE BLOCK
> 61 VE 10 4 No No IDLE BLOCK
> 62 VE 10 4 No No IDLE BLOCK
>
>
> This is my zttool for my span 2:
>
> ?????????????????? T2XXP (PCI) Card 0 Span 2 ??????????????????
> ??????? ?
> ??????
> ? ? ?
> ?
> ? ? Current Alarms: Red Alarm ?
> ?
> ? ? Sync Source: Internally clocked ? ?
> ?
> ? ? IRQ Misses: 0 ? ??
> ?
> ? ? Bipolar Viol: 0 ? ?
> ?
> ? ? Tx/Rx Levels: 0/ 0 ? ?
> ?
> ? ? Total/Conf/Act: 31/ 31/ 30 ? ??
> ?
> ? ? 1111111111222222222233 ???????? ? ?
> ?
> ? ? 1234567890123456789012345678901 ? Back ? ? ?
> ?
> ? ? TxA 111111111111111-111111111111111 ???????? ? ?
> ?
> ? ? TxB 000000000000000-000000000000000 ? ??
> ?
> ? ? TxC 000000000000000-000000000000000 ? ?
> ?
> ? ? TxD 111111111111111-111111111111111 ?
> ?
> ? ? ???????? ?
> ?
> ? ? RxA 111111111111111-111111111111111 ? Loop ? ?
> ?
> ? ? RxB 111111111111111-111111111111111 ???????? ?
> ?
> ? ? RxC 000000000000000-000000000000000 ?
> ?
> ? ? RxD 111111111111111-111111111111111 ?
> ?
> ??????? ?
> ?????
> ??????????????????????????????????????????????????????????????
>
>
>
> Anybody can help me?
>
> Best regards,
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.digium.com/pipermail/asterisk-r2/attachments/20100330/3a1dec3b/attachment-0001.htm
>
> ------------------------------
>
> Message: 3
> Date: Tue, 30 Mar 2010 20:27:02 -0600
> From: Juan Carlos Huerta <juancarloshuerta at gmail.com>
> Subject: Re: [asterisk-r2] MFC R2 Variant Venezuela using openR2
> To: asterisk-r2 at lists.digium.com
> Message-ID:
> <o2q60e5bf4c1003301927w2e60c4bfq6b4d2758be26772c at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> It seems that the other end (CANTV) has blocked your E1 link, maybe
> you can ask to your carrier to check the link status in their end.
>
> Juan Carlos
> ~ Lo que no te mata te fortalece ~
>
>
>
> On Tue, Mar 30, 2010 at 6:37 PM, Madini Ladino <madinix at gmail.com> wrote:
> > I have problems with E1s R2 MFC (CANTV) in Venezuela. Using zttool I got
> Red
> > Alarm.
> >
> > I'm using following versions:
> >
> > Asterisk 1.4.26.1
> > *CLI> mfcr2 show version
> > OpenR2 version: 1.2.0, revision: (release)
> >
> > My digium card is:
> > pci:0000:0b:08.0???? wct4xxp+???? d161:0220 Wildcard TE220 (4th Gen)
> >
> > My? /etc/zaptel.conf? config is:
> >
> > span=1,1,0,ccs,hdb3,crc4
> > bchan=1-15
> > dchan=16
> > bchan=17-31
> > loadzone =es
> > defaultzone=es
> >
> > span=2,1,0,cas,hdb3,crc4
> > cas=32-46:1101
> > dchan=47
> > cas=48-62:1101
> > loadzone =es
> > defaultzone=es
> >
> > (span 1: I have a ISDN E1 (currently working), span 2: I have MFC R2? E1
> > from CANTV)
> >
> >
> > My /etc/zapata.conf
> >
> > group=4
> > signalling=mfcr2
> > mfcr2_variant=ve
> > mfcr2_get_ani_first=no
> > mfcr2_max_ani=10
> > mfcr2_max_dnis=4
> > mfcr2_category=national_subscriber
> > mfcr2_mfback_timeout=-1
> > mfcr2_metering_pulse_timeout=-1
> > mfcr2_logdir=log
> > mfcr2_logging=all
> > channel => 32-46
> > channel => 48-62
> >
> >
> > Actually this R2 E1 is connected to a Nortel and works. When I connect to
> > digium card I only got Red alarm.? I'm using a balun to convert to RJ45.
> >
> > When I do zap restart I got:
> >
> > ? == Starting D-Channel on span 1
> > ? == Starting R2 context on span 1
> > ? == Starting R2 context on span 2
> > [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 32
> > [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 48
> > [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 33
> > [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 49
> > [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 50
> > [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 34
> > [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 51
> > [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 35
> > [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 52
> > [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 36
> > [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 53
> > [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> > Far end blocked on chan 37
> >
> >
> > When I run mfcr2 show channels I have:
> >
> > *CLI> mfcr2 show channels
> > Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS?? Rx CAS
> > ? 32 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 33 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 34 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 35 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 36 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 37 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 38 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 39 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 40 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 41 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 42 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 43 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 44 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 45 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 46 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 48 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 49 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 50 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 51 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 52 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 53 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 54 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 55 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 56 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 57 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 58 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 59 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 60 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 61 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> > ? 62 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >
> >
> > This is my zttool for my span 2:
> >
> > ?????????????????? T2XXP (PCI) Card 0 Span 2 ??????????????????
> > ?? ?????????????????????????????????????????????????????????????????? ?
> > ??????
> > ?? ????? ???????????????????????????????????????????????????????????? ?
> > ?
> > ?? ????? ???? Current Alarms:???? Red Alarm?????????????????????????? ?
> > ?
> > ?? ????? ???? Sync Source:??????? Internally clocked????????????????? ??
> ?
> > ?
> > ?? ????? ???? IRQ Misses:?????????????? 0???????????????????????????? ??
> ??
> > ?
> > ?? ????? ???? Bipolar Viol:???????????? 0???????????????????????????? ??
> ?
> > ?
> > ?? ????? ???? Tx/Rx Levels:???????? 0/? 0???????????????????????????? ??
> ?
> > ?
> > ?? ????? ???? Total/Conf/Act:????? 31/ 31/ 30???????????????????????? ??
> ??
> > ?
> > ?? ????? ????????????????? 1111111111222222222233???????? ??????????? ??
> ?
> > ?
> > ?? ????? ???????? 1234567890123456789012345678901???????? ? Back ???? ??
> ?
> > ?
> > ?? ????? ???? TxA 111111111111111-111111111111111???????? ??????????? ??
> ?
> > ?
> > ?? ????? ???? TxB 000000000000000-000000000000000???????????????????? ??
> ??
> > ?
> > ?? ????? ???? TxC 000000000000000-000000000000000???????????????????? ??
> ?
> > ?
> > ?? ????? ???? TxD 111111111111111-111111111111111???????????????????? ?
> > ?
> > ?? ????? ???????????????????????????????????????????????? ??????????? ?
> > ?
> > ?? ????? ???? RxA 111111111111111-111111111111111???????? ? Loop ???? ?
> > ?
> > ?? ????? ???? RxB 111111111111111-111111111111111???????? ??????????? ?
> > ?
> > ?? ????? ???? RxC 000000000000000-000000000000000???????????????????? ?
> > ?
> > ?? ????? ???? RxD 111111111111111-111111111111111???????????????????? ?
> > ?
> > ?? ?????????????????????????????????????????????????????????????????? ?
> > ?????
> > ???????? ??????????????????????????????????????????????????????????????
> >
> >
> >
> > Anybody can help me?
> >
> > ????????????????????? Best regards,
> >
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> > ? http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
>
> ------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> End of asterisk-r2 Digest, Vol 19, Issue 34
> *******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100423/3c35a1a6/attachment-0001.htm
More information about the asterisk-r2
mailing list