[asterisk-r2] Problems with Astunicall for Asterisk 1.4.21.2

Fri Jan 23 17:59:56 CST 2009

Well I really don't know what happened. I re-install everything from cero and astunicall package as indicated on the readme file. The System is working now as expected. I can make calls everywhere. Thank you very much for your help.

Regards
CR> Date: Fri, 23 Jan 2009 13:46:35 -0500> From: moises.silva at gmail.com> To: asterisk-r2 at lists.digium.com> Subject: Re: [asterisk-r2] Problems with Astunicall for Asterisk 1.4.21.2> > You screwed something when installing unicall, probably you mixed> libraries from soft-switch and libraries from astunicall blog. You> cannot do that. Remove any libunicall, libmfcr2 or libspandsp library> you have installed in the past. Check in /usr/lib and /usr/local/lib> > On Fri, Jan 23, 2009 at 1:31 PM, Carlos Rangel <crangeltpmex at hotmail.com> wrote:> > Hi Moy> > I am still not able to start asterisk. I checked my conf files and seem to> > be fine. I Ran the command (asterisk -vvvvvvvvvvvvvvvvvvc) and evrything> > seems to be fine except the last three output lines. I am not sure if this> > is the reason of the problem.> >> > : chan_phone.so => (Linux Telephony API Support)> > symbol lookup error: /usr/lib/asterisk/modules/chan_unicall.so: ==> > Registered application 'NBScat'> > app_nbscat.so => (Silly NBS Stream Application)> > undefined symbol: uc_event_to_str> >> >> >> > http://pastebin.com/d314d678d> >> >> >> > ________________________________> > From: crangeltpmex at hotmail.com> > To: asterisk-r2 at lists.digium.com> > Date: Fri, 23 Jan 2009 16:15:39 +0000> > Subject: Re: [asterisk-r2] Problems with Astunicall for Asterisk 1.4.21.2> >> > Hi Moy> > I just found that I missed the last step of installing the chan_unicall.so> > driver from your README file, which I belive was a step not needed in past> > versions. I installed it and now I can see the channels created. Asterisk is> > still not running but It is jus a matter of adjusting conf. files. I> > shouldn't have more problems from now. Thank you very much for your help.> >> > Best Regards> > CR> >> >> Date: Thu, 22 Jan 2009 22:41:23 -0600> >> From: moises.silva at gmail.com> >> To: asterisk-r2 at lists.digium.com> >> Subject: Re: [asterisk-r2] Problems with Astunicall for Asterisk 1.4.21.2> >>> >> Be sure all console messages are enabled in /etc/asterisk/logger.conf,> >> then start asterisk like this:> >>> >> asterisk -vvvvvvvvvvvvvvvvvvc> >>> >> and load chan_unicall.so> >>> >> If the Unicall module fails to load, Asterisk will show a message. If> >> you don't have uc commands is because the module is not loaded, that> >> is really the only cause.> >>> >> Moy> >>> >>> >> On Thu, Jan 22, 2009 at 5:51 PM, Carlos Rangel <crangeltpmex at hotmail.com>> >> wrote:> >> > Thanks for your response Moy.> >> >> >> > I did not get any errors when loading the module, however the uotput is> >> > exactly the same, no unicall channels are available. Debugg messgaes are> >> > exactly the same. Call cannot be initiated.> >> >> >> > Regards> >> > CR> >> >> >> >> Date: Thu, 22 Jan 2009 18:33:03 -0500> >> >> From: moises.silva at gmail.com> >> >> To: asterisk-r2 at lists.digium.com> >> >> Subject: Re: [asterisk-r2] Problems with Astunicall for Asterisk> >> >> 1.4.21.2> >> >>> >> >> The unicall module is not loaded, or failed to load.> >> >>> >> >> try executing> >> >>> >> >> CLI> module load chan_unicall.so> >> >>> >> >> If there are errors when loading pastebin them as well. If no errors,> >> >> then you should be ready to go.> >> >>> >> >> Moy> >> >>> >> >> On Thu, Jan 22, 2009 at 6:13 PM, Carlos Rangel> >> >> <crangeltpmex at hotmail.com>> >> >> wrote:> >> >> > Hello> >> >> > I installed the astunicall 1.4.21 package from Moises Silva to> >> >> > support> >> >> > MFCR2> >> >> > signalling on a TE122P. I use trixbox 2.1.13 in a dell optiplex 755> >> >> > dual> >> >> > core with 4 GB of ram. I am in Mexico and use an E1 from Telmex. I> >> >> > haven't> >> >> > been able to make calls yet though. It seems from debugging that> >> >> > Unicall> >> >> > channels are not being created for some reason. Has anyone been able> >> >> > to> >> >> > install this version and make it work?? I have other similar system> >> >> > with> >> >> > the> >> >> > package 1.4.18 working with no problems. The process followed was:> >> >> >> >> >> > - Install trixbox 2.1.13> >> >> > Astunicall 1.4.21> >> >> > - Compile zaptel 1.4.11 and all dependencies> >> >> > - Compile spandsp-0.0.5> >> >> > - Compile libsupertone-0.0.2> >> >> > - Compile libunicall-0.0.6> >> >> > - Compile libmfcr2-0.0.6> >> >> > - Compile Asterisk 1.4.21> >> >> > - Copy Unicall.conf to hte Asterisk directory> >> >> > - Configure zaptel.conf and zapata.conf> >> >> >> >> >> > Evrything compiles just right, however no unicall channesl are> >> >> > available.> >> >> > One thing I noticed is that on the console help commands the uniicall> >> >> > commands are not available nor the channels.> >> >> >> >> >> > UC debug span Enables UC debugging on a span> >> >> > UC destroy channel Destroy a channel> >> >> > UC no debug span Disables UC debugging on a span> >> >> > UC show channels Show active UniCall channels> >> >> > UC show channel Show information on a channel> >> >> >> >> >> >> >> >> > I have posted debbug messages and config files in pastemin.com as> >> >> > follows> >> >> >> >> >> > http://pastebin.com/m5e5d554 debug messages> >> >> > http://pastebin.com/m11a8f59 console output> >> >> > http://pastebin.com/m70df3cca zaptel.conf> >> >> > http://pastebin.com/m59974013 zapata.conf> >> >> > http://pastebin.com/d67147a6d unicall.conf> >> >> >> >> >> > I appreciatte any help on this.> >> >> >> >> >> > Thanks> >> >> > crangeltpmex> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > ________________________________> >> >> > Con Hotmail tienes acceso a múltiples cuentas de mail desde una> >> >> > bandeja> >> >> > de> >> >> > entrada.> >> >> > _______________________________________________> >> >> > --Bandwidth and Colocation Provided by http://www.api-digital.com--> >> >> >> >> >> > asterisk-r2 mailing list> >> >> > To UNSUBSCRIBE or update options visit:> >> >> > http://lists.digium.com/mailman/listinfo/asterisk-r2> >> >> >> >> >>> >> >>> >> >>> >> >> --> >> >> "I do not agree with what you have to say, but I'll defend to the> >> >> death your right to say it." Voltaire> >> >>> >> >> _______________________________________________> >> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--> >> >>> >> >> asterisk-r2 mailing list> >> >> To UNSUBSCRIBE or update options visit:> >> >> http://lists.digium.com/mailman/listinfo/asterisk-r2> >> >> >> >> >> > ________________________________> >> > Con Hotmail tienes acceso a múltiples cuentas de mail desde una bandeja> >> > de> >> > entrada.> >> > _______________________________________________> >> > --Bandwidth and Colocation Provided by http://www.api-digital.com--> >> >> >> > asterisk-r2 mailing list> >> > To UNSUBSCRIBE or update options visit:> >> > http://lists.digium.com/mailman/listinfo/asterisk-r2> >> >> >>> >>> >>> >> --> >> "I do not agree with what you have to say, but I'll defend to the> >> death your right to say it." Voltaire> >>> >> _______________________________________________> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--> >>> >> asterisk-r2 mailing list> >> To UNSUBSCRIBE or update options visit:> >> http://lists.digium.com/mailman/listinfo/asterisk-r2> >> >> > ________________________________> > Entérate de todo lo que hacen tus contactos en la parte de "novedades" de> > Messenger.> >> > ________________________________> > ¿Sabes crear emoticones con tu imagen en Messenger? Descubre cómo.> > _______________________________________________> > --Bandwidth and Colocation Provided by http://www.api-digital.com--> >> > asterisk-r2 mailing list> > To UNSUBSCRIBE or update options visit:> > http://lists.digium.com/mailman/listinfo/asterisk-r2> >> > > > -- > "I do not agree with what you have to say, but I'll defend to the> death your right to say it." Voltaire> > _______________________________________________> --Bandwidth and Colocation Provided by http://www.api-digital.com--> > asterisk-r2 mailing list> To UNSUBSCRIBE or update options visit:> http://lists.digium.com/mailman/listinfo/asterisk-r2
_________________________________________________________________
Sabes que son imágenes dinámicas en Messenger? Descúbrelo.
http://download.live.com/messenger
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090123/99da22e7/attachment.htm 