[asterisk-r2] asterisk-r2 Digest, Vol 5, Issue 13

Melcon Moraes melcon at gmail.com
Thu Jan 15 12:16:07 CST 2009 

Why should we care about reading this if you didn't about pastebin'ing it.

http://pastebin.com

Paste, on pastebin, your config files and the call files. Call files
on e-mail body is one hell of struggle to read because of the line
wrapping.

Sorry for being a pain in your ass.

-MM


On Thu, Jan 15, 2009 at 4:50 PM, Gabriel Monsalvo <gabriel at arlab.com.ar> wrote:
> Hi moy!
> I enabled the callfiles option, this is the callfile for a dial call,
> [15:43:21:977] [Thread: 3078126480] [Chan 1] - Call started at Thu Jan
> 15 15:43:21 2009 on chan 1
> [15:43:21:977] [Thread: 3078126480] [Chan 1] - CAS Tx >> [SEIZE] 0x00
> [15:43:21:977] [Thread: 3078126480] [Chan 1] - CAS Raw Tx >> 0x01
> [15:43:22:006] [Thread: 3078126480] [Chan 1] - Bits changed from 0x08 to
> 0x0C
> [15:43:22:006] [Thread: 3078126480] [Chan 1] - CAS Rx << [SEIZE ACK] 0x0C
> [15:43:22:006] [Thread: 3078126480] [Chan 1] - Attempting to cancel
> timer timer 2
> [15:43:22:006] [Thread: 3078126480] [Chan 1] - timer id 2 found,
> cancelling it now
> [15:43:22:006] [Thread: 3078126480] [Chan 1] - Sending DNIS digit 1
> [15:43:22:006] [Thread: 3078126480] [Chan 1] - MF Tx >> 1 [ON]
> [15:43:42:348] [Thread: 3078126480] [Chan 1] - Attempting to cancel
> timer timer 0
> [15:43:42:348] [Thread: 3078126480] [Chan 1] - Cannot cancel timer 0
> [15:43:42:348] [Thread: 3078126480] [Chan 1] - CAS Tx >> [CLEAR FORWARD]
> 0x08
> [15:43:42:348] [Thread: 3078126480] [Chan 1] - CAS Raw Tx >> 0x09
> [15:43:42:408] [Thread: 3081071504] [Chan 1] - Alarm Cleared
> [15:43:42:662] [Thread: 3081071504] [Chan 1] - Bits changed from 0x0C to
> 0x08
> [15:43:42:662] [Thread: 3081071504] [Chan 1] - CAS Rx << [IDLE] 0x08
> [15:43:42:662] [Thread: 3081071504] [Chan 1] - Call ended
> [15:43:42:662] [Thread: 3081071504] [Chan 1] - Attempting to cancel
> timer timer 0
> [15:43:42:662] [Thread: 3081071504] [Chan 1] - Cannot cancel timer 0
>
> and this is for incoming call to E1 line,
> [15:48:30:547] [Thread: 3081071504] [Chan 2] - Call started at Thu Jan
> 15 15:48:30 2009 on chan 2
> [15:48:30:547] [Thread: 3081071504] [Chan 2] - CAS Tx >> [SEIZE ACK] 0x0C
> [15:48:30:547] [Thread: 3081071504] [Chan 2] - CAS Raw Tx >> 0x0D
> [15:48:30:726] [Thread: 3081071504] [Chan 2] - MF Rx << 6 [ON]
> [15:48:30:726] [Thread: 3081071504] [Chan 2] - Attempting to cancel
> timer timer 0
> [15:48:30:726] [Thread: 3081071504] [Chan 2] - Cannot cancel timer 0
> [15:48:30:726] [Thread: 3081071504] [Chan 2] - Getting DNIS digit 6
> [15:48:30:726] [Thread: 3081071504] [Chan 2] - DNIS so far: 6, expected
> length: 4
> [15:48:30:726] [Thread: 3081071504] [Chan 2] - Requesting next DNIS with
> signal 0x31.
> [15:48:30:726] [Thread: 3081071504] [Chan 2] - MF Tx >> 1 [ON]
> [15:48:30:746] [Thread: 3081071504] [Chan 2] - MF Rx << 6 [OFF]
> [15:48:30:746] [Thread: 3081071504] [Chan 2] - MF Tx >> 1 [OFF]
> [15:48:35:726] [Thread: 3081071504] [Chan 2] - Attempting to cancel
> timer timer 2
> [15:48:35:726] [Thread: 3081071504] [Chan 2] - timer id 2 found,
> cancelling it now
> [15:48:35:726] [Thread: 3081071504] [Chan 2] - calling timer callback
> [15:48:35:726] [Thread: 3081071504] [Chan 2] - MF cycle timed out, no
> more DNIS
> [15:48:35:726] [Thread: 3081071504] [Chan 2] - MF Tx >> 5 [ON]
> [15:48:35:886] [Thread: 3081071504] [Chan 2] - Attempting to cancel
> timer timer 3
> [15:48:35:886] [Thread: 3081071504] [Chan 2] - timer id 3 found,
> cancelling it now
> [15:48:35:886] [Thread: 3081071504] [Chan 2] - calling timer callback
> [15:48:35:886] [Thread: 3081071504] [Chan 2] - MF Tx >> 5 [OFF]
> [15:48:49:939] [Thread: 3081071504] [Chan 2] - Bits changed from 0x00 to
> 0x08
> [15:48:49:939] [Thread: 3081071504] [Chan 2] - CAS Rx << [CLEAR FORWARD]
> 0x08
> [15:48:49:939] [Thread: 3081071504] [Chan 2] - Far end disconnected.
> Reason: Normal Clearing
> [15:48:49:939] [Thread: 3081071504] [Chan 2] - Call ended
> [15:48:49:939] [Thread: 3081071504] [Chan 2] - Attempting to cancel
> timer timer 0
> [15:48:49:939] [Thread: 3081071504] [Chan 2] - Cannot cancel timer 0
>
> in both cases does not hear anything.
> Thanks in advance,
>
> Gabriel Monsalvo.
>
>
>> Send asterisk-r2 mailing list submissions to
>>       asterisk-r2 at lists.digium.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>       http://lists.digium.com/mailman/listinfo/asterisk-r2
>> or, via email, send a message with subject or body 'help' to
>>       asterisk-r2-request at lists.digium.com
>>
>> You can reach the person managing the list at
>>       asterisk-r2-owner at lists.digium.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of asterisk-r2 digest..."
>>
>>
>> Today's Topics:
>>
>>    1. Re: Problem using patch for 1.4.18 (Carlos Chavez)
>>    2. Re: asterisk-r2 Digest, Vol 5, Issue 12 (Gabriel Monsalvo)
>>    3. help,dahdi_scan,alarm=red (Qian Ma)
>>    4. Re: help,dahdi_scan,alarm=red (Melcon Moraes)
>>    5. Re: asterisk-r2 Digest, Vol 5, Issue 12 (Moises Silva)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Wed, 14 Jan 2009 15:27:44 -0600
>> From: Carlos Chavez <cursor at telecomabmex.com>
>> Subject: Re: [asterisk-r2] Problem using patch for 1.4.18
>> To: asterisk-r2 at lists.digium.com
>> Message-ID: <1231968464.3400.4.camel at cursor.telecomabmex.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>>       Ok.  It now works.  I only get this warning when compiling:
>>
>> chan_zap.c: In function ?zt_r2_on_hardware_alarm?:
>> chan_zap.c:974: warning: unused variable ?res?
>>
>>       Any concerns about that?
>>
>> On Wed, 2009-01-14 at 12:42 -0500, Moises Silva wrote:
>>
>>> I installed from source, and now that you mention it, I think I had
>>> the same problem you have and that's why I installed 2.60.
>>>
>>> This is a direct link: http://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.bz2
>>>
>>> And this is the official web page: http://www.gnu.org/software/autoconf/
>>>
>>>
>>> On Wed, Jan 14, 2009 at 12:38 PM, Carlos Chavez <cursor at telecomabmex.com> wrote:
>>>
>>>>        Ok.  Where did you get autoconf 2.60 for fedora 10?  The version that
>>>> installs by default is 2.63 which is the one I used.
>>>>
>>>> On Wed, 2009-01-14 at 12:34 -0500, Moises Silva wrote:
>>>>
>>>>> I did not quite understand what you mean about the fedora versions.
>>>>>
>>>>> I have Fedora 10 installed on my laptop and installed autoconf-2.60
>>>>> and the ./bootstrap.sh script runs without problems. This definitely
>>>>> is a problem with the versions of autotools.
>>>>>
>>>>> Where did you run the ./bootstrap.sh script and under which autoconf version?
>>>>>
>>>>> On Wed, Jan 14, 2009 at 12:26 PM, Carlos Chavez <cursor at telecomabmex.com> wrote:
>>>>>
>>>>>>        Yes, this is what I get when I run bootstrap.sh in the asterisk
>>>>>> directory after applying the patch:
>>>>>> [root at cursor asterisk-1.4.18]# ./bootstrap.sh
>>>>>> Generating the configure script ...
>>>>>> configure.ac:21: warning: AC_COMPILE_IFELSE was called before
>>>>>> AC_USE_SYSTEM_EXTENSIONS
>>>>>> ../../lib/autoconf/specific.m4:386: AC_USE_SYSTEM_EXTENSIONS is expanded
>>>>>> from...
>>>>>> configure.ac:21: the top level
>>>>>> configure.ac:21: warning: AC_RUN_IFELSE was called before
>>>>>> AC_USE_SYSTEM_EXTENSIONS
>>>>>> configure.ac:124: warning: AC_CACHE_VAL(GNU_MAKE, ...): suspicious
>>>>>> cache-id, must contain _cv_ to be cached
>>>>>> ../../lib/autoconf/general.m4:1974: AC_CACHE_VAL is expanded from...
>>>>>> ../../lib/autoconf/general.m4:1994: AC_CACHE_CHECK is expanded from...
>>>>>> acinclude.m4:101: AST_CHECK_GNU_MAKE is expanded from...
>>>>>> configure.ac:124: the top level
>>>>>> configure:6379: error: possibly undefined macro:
>>>>>> _AC_PATH_PROG_FEATURE_CHECK
>>>>>>      If this token and others are legitimate, please use
>>>>>> m4_pattern_allow.
>>>>>>      See the Autoconf documentation.
>>>>>> configure:6380: error: possibly undefined macro:
>>>>>> _AC_FEATURE_CHECK_LENGTH
>>>>>> configure.ac:21: warning: AC_COMPILE_IFELSE was called before
>>>>>> AC_USE_SYSTEM_EXTENSIONS
>>>>>> ../../lib/autoconf/specific.m4:386: AC_USE_SYSTEM_EXTENSIONS is expanded
>>>>>> from...
>>>>>> configure.ac:21: the top level
>>>>>> configure.ac:21: warning: AC_RUN_IFELSE was called before
>>>>>> AC_USE_SYSTEM_EXTENSIONS
>>>>>> configure.ac:124: warning: AC_CACHE_VAL(GNU_MAKE, ...): suspicious
>>>>>> cache-id, must contain _cv_ to be cached
>>>>>> ../../lib/autoconf/general.m4:1974: AC_CACHE_VAL is expanded from...
>>>>>> ../../lib/autoconf/general.m4:1994: AC_CACHE_CHECK is expanded from...
>>>>>> acinclude.m4:101: AST_CHECK_GNU_MAKE is expanded from...
>>>>>> configure.ac:124: the top level
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, 2009-01-14 at 12:24 -0500, Moises Silva wrote:
>>>>>>
>>>>>>> did you run the ./bootstrap.sh script after applying the patch?
>>>>>>>
>>>>>>> On Wed, Jan 14, 2009 at 12:22 PM, Carlos Chavez <cursor at telecomabmex.com> wrote:
>>>>>>>
>>>>>>>>        I am trying to use the patch for Asterisk 1.4.18, it applies with now
>>>>>>>> errors or warnings.  I do get several warnings when running bootstrap.sh
>>>>>>>> but no errors.  When running ./configure I get the following error:
>>>>>>>>
>>>>>>>> checking for a sed that does not truncate output... ./configure: line
>>>>>>>> 6379: syntax error near unexpected token `SED,'
>>>>>>>> ./configure: line 6379: `     _AC_PATH_PROG_FEATURE_CHECK(SED, sed
>>>>>>>> gsed,'
>>>>>>>>
>>>>>>>>        I do not know if this has something to do that I applied the patch on a
>>>>>>>> Fedora 10 system because I do not have autoconf 2.60 on the machine I am
>>>>>>>> trying to compile asterisk (Fedora Core 5).
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Telecomunicaciones Abiertas de M?xico S.A. de C.V.
>>>>>>>> Carlos Ch?vez Prats
>>>>>>>> Director de Tecnolog?a
>>>>>>>> +52-55-91169161 ext 2001
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>>
>>>>>>>> asterisk-r2 mailing list
>>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> --
>>>>>> Telecomunicaciones Abiertas de M?xico S.A. de C.V.
>>>>>> Carlos Ch?vez Prats
>>>>>> Director de Tecnolog?a
>>>>>> +52-55-91169161 ext 2001
>>>>>>
>>>>>> _______________________________________________
>>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>
>>>>>> asterisk-r2 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> "I do not agree with what you have to say, but I'll defend to the
>>>>> death your right to say it." Voltaire
>>>>>
>>>>> _______________________________________________
>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>> --
>>>> Telecomunicaciones Abiertas de M?xico S.A. de C.V.
>>>> Carlos Ch?vez Prats
>>>> Director de Tecnolog?a
>>>> +52-55-91169161 ext 2001
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>>
>>>
>>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

More information about the asterisk-r2 mailing list