[asterisk-r2] Problem MFC R2

[Juan Carlos Gonzalez Cardona]

begin yesterday in the afternoon, and today, but no passed before, if the
problem persist i continue this threath, thank you

2009/2/11 Moises Silva <moises.silva at gmail.com>

> Are you experiencing the problem right now? If not, how frequent is?
>
> The error message happens because we start the call but don't receive
> a response from the other side (the telco). The next time you see the
> issue execute mfcr2 show channels to verify both ends are IDLE. You
> can also execute dahdi_tool and verify the bit pattern at both ends is
> 1001.
>
> On Wed, Feb 11, 2009 at 11:03 AM, Juan Carlos Gonzalez Cardona
> <juancarlosg6 at gmail.com> wrote:
> >
> >
> > 2009/2/11 Moises Silva <moises.silva at gmail.com>
> >>
> >> Need openr2 version (mfcr2 show version), Asterisk version (core show
> >> version)?
> >>
> >> However, I suspect this may be a hardware problem (since you need to
> >> restart the server). Which board are you using and dahdi drivers
> >> version?
> >>
> >> Please pastebin the chan_dahdi.conf and dahdi configuration.
> >>
> >> On Wed, Feb 11, 2009 at 7:59 AM, Juan Carlos Gonzalez Cardona
> >> <juancarlosg6 at gmail.com> wrote:
> >> > Hi everyone, yesterday my server show me this error
> >> >
> >> > ERROR[8167] chan_dahdi.c: Chan 2 - Protocol error. Reason = Seize
> >> > Timeout,
> >> > R2 State = Seize Transmitted, MF state = MF Engine Off, MF Group =
> >> > Forward
> >> > MF init, CAS = 0x8
> >> > DNIS = 3409954, ANI = 3323565, MF = 0x20
> >> > ERROR[8167] chan_dahdi.c: MFC/R2 protocol error on chan 2: Seize
> Timeout
> >> >
> >> > The internal calls is ok, and the sip trunks is ok, only the signal of
> >> > my
> >> > E1-R2 is off, i need to restar my server physically to restore de
> >> > service, I
> >> > am worried, because this problem? I have 2 months working without
> >> > problems
> >> > until yesterday and today who repeatedly passed,
> >> >
> >> > Thank's
> >> >
> >> > --
> >> > Juan Carlos Gonzalez C.
> >> >
> >> > _______________________________________________
> >> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >> >
> >> > asterisk-r2 mailing list
> >> > To UNSUBSCRIBE or update options visit:
> >> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >> >
> >>
> >>
> >>
> >> --
> >> "I do not agree with what you have to say, but I'll defend to the
> >> death your right to say it." Voltaire
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >>
> >> asterisk-r2 mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
> > My hardware
> >
> > Server: HP DL-360
> > Card: Sangoma A102
> > Versions:
> >
> > OpenR2 version: 1.0.0, revision: exported
> > Asterisk 1.4.22-rc5
> >
> >
> > My server dosen't blocked, is only the signalling of my E1, but i see de
> > leds in green in my card.
> >
> >
> >
> >
> > --
> > Juan Carlos Gonzalez C.
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
>
>
>
> --
> "I do not agree with what you have to say, but I'll defend to the
> death your right to say it." Voltaire
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
Juan Carlos Gonzalez C.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090211/17fb8a8f/attachment-0001.htm