[asterisk-r2] Asterisk R2 configuration

Thu Nov 20 14:52:39 CST 2008

correct ... that should give you a solid green in zttool or dahdi_tool

On Thu, Nov 20, 2008 at 2:48 PM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
> and to test it i should connect one side to one of the two ports in my
> server and the other side to the second correct?
>
> Camilo
>
> Moises Silva wrote:
>> This is more graphic: http://www.moythreads.com/unicall/e1_crossover.html
>>
>> On Thu, Nov 20, 2008 at 12:19 PM, Alexis Gavidia <agavidia at iptelven.com> wrote:
>>> RJ-45 pin numbering
>>>
>>>
>>>
>>> 1 -> RRING
>>> 2 -> RTIP
>>> 4 -> TRING
>>> 5 -> TTIP
>>>
>>> To make a loop join 1 with 4 and 2 with 5.
>>>
>>>
>>> On Thu, Nov 20, 2008 at 1:42 PM, Camilo Quelquejeu <camilo at cabimax.com>
>>> wrote:
>>>> and i should connect the cross over cable from one E1 port to the other?
>>>> to create a loop correct? on that same note will any cross over cable
>>>> work of i need to have that specific crossover cable with the diagram
>>>> moy provided?
>>>>
>>>> Camilo
>>>>
>>>> Melcon Moraes wrote:
>>>>> Buying Moy's advice on crossover E1 cable should help you. That would
>>>>> be a nice starting point.
>>>>>
>>>>> -MM
>>>>>
>>>>> On Tue, Nov 18, 2008 at 2:17 PM, Camilo Quelquejeu <camilo at cabimax.com>
>>>>> wrote:
>>>>>> and the only way to check that is with the cable right?
>>>>>>
>>>>>> Camilo
>>>>>>
>>>>>> Moises Silva wrote:
>>>>>>> unicall has nothing to do with the red alarms.
>>>>>>>
>>>>>>> check your installation? yes, when you get rid of the red alarms. The
>>>>>>> first thing is to get rid of the red alarms, and red alarms mean you
>>>>>>> connected something physically wrong or you configured the zaptel.conf
>>>>>>> wrong for the type of link provided.
>>>>>>>
>>>>>>> On Tue, Nov 18, 2008 at 9:24 AM, Camilo Quelquejeu
>>>>>>> <camilo at cabimax.com> wrote:
>>>>>>>> Is there any chance i have the compilation and instalation of the
>>>>>>>> unicall wrong, hence the red alarms? is there any way i can check my
>>>>>>>> instalation?
>>>>>>>>
>>>>>>>> Camilo
>>>>>>>>
>>>>>>>> Moises Silva wrote:
>>>>>>>>> I don't see anything wrong with your config, but looks suspicious to
>>>>>>>>> me that you are using span=2,0,0
>>>>>>>>>
>>>>>>>>> Are you use you want span 2 to be the master?
>>>>>>>>>
>>>>>>>>> In any case, you can create a E1 cross-over cable to verify your own
>>>>>>>>> configuration without the telco. check this out:
>>>>>>>>> http://www.moythreads.com/unicall/e1_crossover.html
>>>>>>>>>
>>>>>>>>> That way you will discard your configuration and can call the telco
>>>>>>>>> to
>>>>>>>>> ask why your link is down.
>>>>>>>>>
>>>>>>>>> On Thu, Oct 30, 2008 at 1:47 PM, Camilo Quelquejeu
>>>>>>>>> <camilo at cabimax.com> wrote:
>>>>>>>>>> the zaptel.conf goes like this
>>>>>>>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>>>>>>>>> HDB3/CCS/CRC4 RED
>>>>>>>>>> span=1,1,0,cas,hdb3
>>>>>>>>>> cas=1-15:1101
>>>>>>>>>> cas=17-31:1101
>>>>>>>>>> #
>>>>>>>>>> span=2,0,0,cas,hdb3
>>>>>>>>>> cas=32-46:1101
>>>>>>>>>> cas=48-62:1101
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> # Global data
>>>>>>>>>>
>>>>>>>>>> loadzone        = br
>>>>>>>>>> defaultzone     = br
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> and the ztcfg -v  goes like this
>>>>>>>>>>
>>>>>>>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>>>>>>> SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>>>>>>>
>>>>>>>>>> 60 channels to configure.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> thanks in advanced for the help
>>>>>>>>>>
>>>>>>>>>> Camilo
>>>>>>>>>>
>>>>>>>>>> Moises Silva wrote:
>>>>>>>>>>> It could be caused by the moon :) who knows, without showing your
>>>>>>>>>>> zaptel.conf and pastebin of the output of ztcfg -vv we cannot try
>>>>>>>>>>> to
>>>>>>>>>>> answer.
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Oct 30, 2008 at 11:20 AM, Camilo Quelquejeu
>>>>>>>>>>> <camilo at cabimax.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>> I installed, compiled and configured the astunicall, and when i
>>>>>>>>>>>> use the
>>>>>>>>>>>> ztcfg -v command, it tells me there are 60 channels to be
>>>>>>>>>>>> configured and
>>>>>>>>>>>> the zttool shows the card with a red alarm, what could be the
>>>>>>>>>>>> cause of
>>>>>>>>>>>> this? does anyone know how to configure the extensions.conf so i
>>>>>>>>>>>> can use
>>>>>>>>>>>> the unicall channels to receive calls in El salvador?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Camilo Quelquejeu
>>>>>>>>>>>> Chief IT  |  Cabimax, S.A.
>>>>>>>>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> --Bandwidth and Colocation Provided by
>>>>>>>>>>>> http://www.api-digital.com--
>>>>>>>>>>>>
>>>>>>>>>>>> asterisk-r2 mailing list
>>>>>>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>>>>>>  http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Camilo Quelquejeu
>>>>>>>>>> Chief IT  |  Cabimax, S.A.
>>>>>>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>> --
>>>>>>>> Camilo Quelquejeu
>>>>>>>> Chief IT  |  Cabimax, S.A.
>>>>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>>
>>>>>>>> asterisk-r2 mailing list
>>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>>>
>>>>>>>
>>>>>> --
>>>>>> Camilo Quelquejeu
>>>>>> Chief IT  |  Cabimax, S.A.
>>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>
>>>>>> asterisk-r2 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>
>>>>>
>>>> --
>>>> Camilo Quelquejeu
>>>> Chief IT  |  Cabimax, S.A.
>>>> camilo at cabimax.com  Tel: 302-7424
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>>
>
> --
> Camilo Quelquejeu
> Chief IT  |  Cabimax, S.A.
> camilo at cabimax.com  Tel: 302-7424
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

-- 
"I do not agree with what you have to say, but I'll defend to the
death your right to say it." Voltaire