[asterisk-r2] Asterisk R2 configuration

Thu Nov 20 12:30:44 CST 2008

This is more graphic: http://www.moythreads.com/unicall/e1_crossover.html

On Thu, Nov 20, 2008 at 12:19 PM, Alexis Gavidia <agavidia at iptelven.com> wrote:
> RJ-45 pin numbering
>
>
>
> 1 -> RRING
> 2 -> RTIP
> 4 -> TRING
> 5 -> TTIP
>
> To make a loop join 1 with 4 and 2 with 5.
>
>
> On Thu, Nov 20, 2008 at 1:42 PM, Camilo Quelquejeu <camilo at cabimax.com>
> wrote:
>>
>> and i should connect the cross over cable from one E1 port to the other?
>> to create a loop correct? on that same note will any cross over cable
>> work of i need to have that specific crossover cable with the diagram
>> moy provided?
>>
>> Camilo
>>
>> Melcon Moraes wrote:
>> > Buying Moy's advice on crossover E1 cable should help you. That would
>> > be a nice starting point.
>> >
>> > -MM
>> >
>> > On Tue, Nov 18, 2008 at 2:17 PM, Camilo Quelquejeu <camilo at cabimax.com>
>> > wrote:
>> >> and the only way to check that is with the cable right?
>> >>
>> >> Camilo
>> >>
>> >> Moises Silva wrote:
>> >>> unicall has nothing to do with the red alarms.
>> >>>
>> >>> check your installation? yes, when you get rid of the red alarms. The
>> >>> first thing is to get rid of the red alarms, and red alarms mean you
>> >>> connected something physically wrong or you configured the zaptel.conf
>> >>> wrong for the type of link provided.
>> >>>
>> >>> On Tue, Nov 18, 2008 at 9:24 AM, Camilo Quelquejeu
>> >>> <camilo at cabimax.com> wrote:
>> >>>> Is there any chance i have the compilation and instalation of the
>> >>>> unicall wrong, hence the red alarms? is there any way i can check my
>> >>>> instalation?
>> >>>>
>> >>>> Camilo
>> >>>>
>> >>>> Moises Silva wrote:
>> >>>>> I don't see anything wrong with your config, but looks suspicious to
>> >>>>> me that you are using span=2,0,0
>> >>>>>
>> >>>>> Are you use you want span 2 to be the master?
>> >>>>>
>> >>>>> In any case, you can create a E1 cross-over cable to verify your own
>> >>>>> configuration without the telco. check this out:
>> >>>>> http://www.moythreads.com/unicall/e1_crossover.html
>> >>>>>
>> >>>>> That way you will discard your configuration and can call the telco
>> >>>>> to
>> >>>>> ask why your link is down.
>> >>>>>
>> >>>>> On Thu, Oct 30, 2008 at 1:47 PM, Camilo Quelquejeu
>> >>>>> <camilo at cabimax.com> wrote:
>> >>>>>> the zaptel.conf goes like this
>> >>>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>> >>>>>> HDB3/CCS/CRC4 RED
>> >>>>>> span=1,1,0,cas,hdb3
>> >>>>>> cas=1-15:1101
>> >>>>>> cas=17-31:1101
>> >>>>>> #
>> >>>>>> span=2,0,0,cas,hdb3
>> >>>>>> cas=32-46:1101
>> >>>>>> cas=48-62:1101
>> >>>>>>
>> >>>>>>
>> >>>>>> # Global data
>> >>>>>>
>> >>>>>> loadzone        = br
>> >>>>>> defaultzone     = br
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>> and the ztcfg -v  goes like this
>> >>>>>>
>> >>>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>> >>>>>> SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>> >>>>>>
>> >>>>>> 60 channels to configure.
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>> thanks in advanced for the help
>> >>>>>>
>> >>>>>> Camilo
>> >>>>>>
>> >>>>>> Moises Silva wrote:
>> >>>>>>> It could be caused by the moon :) who knows, without showing your
>> >>>>>>> zaptel.conf and pastebin of the output of ztcfg -vv we cannot try
>> >>>>>>> to
>> >>>>>>> answer.
>> >>>>>>>
>> >>>>>>> On Thu, Oct 30, 2008 at 11:20 AM, Camilo Quelquejeu
>> >>>>>>> <camilo at cabimax.com>
>> >>>>>>> wrote:
>> >>>>>>>> I installed, compiled and configured the astunicall, and when i
>> >>>>>>>> use the
>> >>>>>>>> ztcfg -v command, it tells me there are 60 channels to be
>> >>>>>>>> configured and
>> >>>>>>>> the zttool shows the card with a red alarm, what could be the
>> >>>>>>>> cause of
>> >>>>>>>> this? does anyone know how to configure the extensions.conf so i
>> >>>>>>>> can use
>> >>>>>>>> the unicall channels to receive calls in El salvador?
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> --
>> >>>>>>>> Camilo Quelquejeu
>> >>>>>>>> Chief IT  |  Cabimax, S.A.
>> >>>>>>>> camilo at cabimax.com  Tel: 302-7424
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> _______________________________________________
>> >>>>>>>> --Bandwidth and Colocation Provided by
>> >>>>>>>> http://www.api-digital.com--
>> >>>>>>>>
>> >>>>>>>> asterisk-r2 mailing list
>> >>>>>>>> To UNSUBSCRIBE or update options visit:
>> >>>>>>>>  http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >>>>>>>>
>> >>>>>> --
>> >>>>>> Camilo Quelquejeu
>> >>>>>> Chief IT  |  Cabimax, S.A.
>> >>>>>> camilo at cabimax.com  Tel: 302-7424
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>
>> >>>> --
>> >>>> Camilo Quelquejeu
>> >>>> Chief IT  |  Cabimax, S.A.
>> >>>> camilo at cabimax.com  Tel: 302-7424
>> >>>>
>> >>>>
>> >>>>
>> >>>> _______________________________________________
>> >>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> >>>>
>> >>>> asterisk-r2 mailing list
>> >>>> To UNSUBSCRIBE or update options visit:
>> >>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >>>>
>> >>>
>> >>>
>> >> --
>> >> Camilo Quelquejeu
>> >> Chief IT  |  Cabimax, S.A.
>> >> camilo at cabimax.com  Tel: 302-7424
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> >>
>> >> asterisk-r2 mailing list
>> >> To UNSUBSCRIBE or update options visit:
>> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >>
>> >
>> >
>>
>> --
>> Camilo Quelquejeu
>> Chief IT  |  Cabimax, S.A.
>> camilo at cabimax.com  Tel: 302-7424
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>


-- 
"I do not agree with what you have to say, but I'll defend to the
death your right to say it." Voltaire