[asterisk-r2] Asterisk R2 configuration

[Alexis Gavidia]

*RJ-45 pin numbering*

*[image: RJ-45 Pin Count] * **

1 -> RRING
2 -> RTIP
4 -> TRING
5 -> TTIP

To make a loop join 1 with 4 and 2 with 5.




On Thu, Nov 20, 2008 at 1:42 PM, Camilo Quelquejeu <camilo at cabimax.com>wrote:

> and i should connect the cross over cable from one E1 port to the other?
> to create a loop correct? on that same note will any cross over cable
> work of i need to have that specific crossover cable with the diagram
> moy provided?
>
> Camilo
>
> Melcon Moraes wrote:
> > Buying Moy's advice on crossover E1 cable should help you. That would
> > be a nice starting point.
> >
> > -MM
> >
> > On Tue, Nov 18, 2008 at 2:17 PM, Camilo Quelquejeu <camilo at cabimax.com>
> wrote:
> >> and the only way to check that is with the cable right?
> >>
> >> Camilo
> >>
> >> Moises Silva wrote:
> >>> unicall has nothing to do with the red alarms.
> >>>
> >>> check your installation? yes, when you get rid of the red alarms. The
> >>> first thing is to get rid of the red alarms, and red alarms mean you
> >>> connected something physically wrong or you configured the zaptel.conf
> >>> wrong for the type of link provided.
> >>>
> >>> On Tue, Nov 18, 2008 at 9:24 AM, Camilo Quelquejeu <camilo at cabimax.com>
> wrote:
> >>>> Is there any chance i have the compilation and instalation of the
> >>>> unicall wrong, hence the red alarms? is there any way i can check my
> >>>> instalation?
> >>>>
> >>>> Camilo
> >>>>
> >>>> Moises Silva wrote:
> >>>>> I don't see anything wrong with your config, but looks suspicious to
> >>>>> me that you are using span=2,0,0
> >>>>>
> >>>>> Are you use you want span 2 to be the master?
> >>>>>
> >>>>> In any case, you can create a E1 cross-over cable to verify your own
> >>>>> configuration without the telco. check this out:
> >>>>> http://www.moythreads.com/unicall/e1_crossover.html
> >>>>>
> >>>>> That way you will discard your configuration and can call the telco
> to
> >>>>> ask why your link is down.
> >>>>>
> >>>>> On Thu, Oct 30, 2008 at 1:47 PM, Camilo Quelquejeu <
> camilo at cabimax.com> wrote:
> >>>>>> the zaptel.conf goes like this
> >>>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4
> RED
> >>>>>> span=1,1,0,cas,hdb3
> >>>>>> cas=1-15:1101
> >>>>>> cas=17-31:1101
> >>>>>> #
> >>>>>> span=2,0,0,cas,hdb3
> >>>>>> cas=32-46:1101
> >>>>>> cas=48-62:1101
> >>>>>>
> >>>>>>
> >>>>>> # Global data
> >>>>>>
> >>>>>> loadzone        = br
> >>>>>> defaultzone     = br
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> and the ztcfg -v  goes like this
> >>>>>>
> >>>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> >>>>>> SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> >>>>>>
> >>>>>> 60 channels to configure.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> thanks in advanced for the help
> >>>>>>
> >>>>>> Camilo
> >>>>>>
> >>>>>> Moises Silva wrote:
> >>>>>>> It could be caused by the moon :) who knows, without showing your
> >>>>>>> zaptel.conf and pastebin of the output of ztcfg -vv we cannot try
> to
> >>>>>>> answer.
> >>>>>>>
> >>>>>>> On Thu, Oct 30, 2008 at 11:20 AM, Camilo Quelquejeu <
> camilo at cabimax.com>
> >>>>>>> wrote:
> >>>>>>>> I installed, compiled and configured the astunicall, and when i
> use the
> >>>>>>>> ztcfg -v command, it tells me there are 60 channels to be
> configured and
> >>>>>>>> the zttool shows the card with a red alarm, what could be the
> cause of
> >>>>>>>> this? does anyone know how to configure the extensions.conf so i
> can use
> >>>>>>>> the unicall channels to receive calls in El salvador?
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> --
> >>>>>>>> Camilo Quelquejeu
> >>>>>>>> Chief IT  |  Cabimax, S.A.
> >>>>>>>> camilo at cabimax.com  Tel: 302-7424
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> _______________________________________________
> >>>>>>>> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
> >>>>>>>>
> >>>>>>>> asterisk-r2 mailing list
> >>>>>>>> To UNSUBSCRIBE or update options visit:
> >>>>>>>>  http://lists.digium.com/mailman/listinfo/asterisk-r2
> >>>>>>>>
> >>>>>> --
> >>>>>> Camilo Quelquejeu
> >>>>>> Chief IT  |  Cabimax, S.A.
> >>>>>> camilo at cabimax.com  Tel: 302-7424
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>
> >>>> --
> >>>> Camilo Quelquejeu
> >>>> Chief IT  |  Cabimax, S.A.
> >>>> camilo at cabimax.com  Tel: 302-7424
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >>>>
> >>>> asterisk-r2 mailing list
> >>>> To UNSUBSCRIBE or update options visit:
> >>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >>>>
> >>>
> >>>
> >> --
> >> Camilo Quelquejeu
> >> Chief IT  |  Cabimax, S.A.
> >> camilo at cabimax.com  Tel: 302-7424
> >>
> >>
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >>
> >> asterisk-r2 mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >>
> >
> >
>
> --
> Camilo Quelquejeu
> Chief IT  |  Cabimax, S.A.
> camilo at cabimax.com  Tel: 302-7424
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20081120/bec1c469/attachment.htm