[asterisk-gui] Dial tone

[Bob Crandell]

On Sat, 2009-02-28 at 01:38 +0000, Neil Stone wrote:

> Bob Crandell wrote:
> > Which panel does that?
> > 
> > On Sat, 2009-02-28 at 00:17 +0000, Neil Stone wrote:
> > Bob Crandell wrote:
> >> Hi again,
> > 
> >> So many pent up questions.
> > 
> >> Digium card with one FXO and one FXS daughter.  Asterisk-gui
> >> detected hardware ok. Working down the panels on the left:
> >> Configure Hardware worked There is no mISDN to config Added a trunk
> >> pointing to the FXO port Outgoing Calling Rules pointed to that
> >> trunk Added Dial Plan Added 2 users.
> > 
> >> I was assuming I should be able to connect an analog phone and hear
> >>  a dial tone but I don't.  What did I miss?
> > 
> >> BTW, these 2 users can call each other with softphones.
> > 
> >> Thanks -- Bob Crandell
> > 
> > 
> > Did you add an extension for the FXS port ?
> >
> 
> The add user one.. there is a section that mentiones the analogue port
> to use..

Yes.  I did that.

At the risk of showing what a noobie I am, Does the handset plug into
the port with the red card or the green one?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20090228/6e2c5971/attachment.htm