<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.24.1.1">
</HEAD>
<BODY>
On Sat, 2009-02-28 at 01:38 +0000, Neil Stone wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
Bob Crandell wrote:
> Which panel does that?
>
> On Sat, 2009-02-28 at 00:17 +0000, Neil Stone wrote:
> Bob Crandell wrote:
>> Hi again,
>
>> So many pent up questions.
>
>> Digium card with one FXO and one FXS daughter. Asterisk-gui
>> detected hardware ok. Working down the panels on the left:
>> Configure Hardware worked There is no mISDN to config Added a trunk
>> pointing to the FXO port Outgoing Calling Rules pointed to that
>> trunk Added Dial Plan Added 2 users.
>
>> I was assuming I should be able to connect an analog phone and hear
>> a dial tone but I don't. What did I miss?
>
>> BTW, these 2 users can call each other with softphones.
>
>> Thanks -- Bob Crandell
>
>
> Did you add an extension for the FXS port ?
>
The add user one.. there is a section that mentiones the analogue port
to use..
</PRE>
</BLOCKQUOTE>
Yes. I did that.<BR>
<BR>
At the risk of showing what a noobie I am, Does the handset plug into the port with the red card or the green one?
</BODY>
</HTML>