RV: [asterisk-dev] UUI in calls

[Daniel Montejo]

-----Mensaje original-----
De: Daniel Montejo [mailto:montejodaniel at hotmail.com] 
Enviado el: jueves, 07 de septiembre de 2006 9:19
Para: 'John Todd'
Asunto: RE: [asterisk-dev] UUI in calls

Hello,
I'm developing an app_csta_interface and i am using core asterisk functions.
I need know if there is any field in any struct where I can put a void* that
is passed with the call from device1 to device2. Are you sure that this
question is a user question?

Thank you

-----Mensaje original-----
De: John Todd [mailto:jtodd at loligo.com] 
Enviado el: jueves, 07 de septiembre de 2006 7:41
Para: asterisk-users at lists.digium.com; Daniel Montejo
Asunto: Re: [asterisk-dev] UUI in calls

>Hello,
>I need pass user to user information when I use originate a call 
>from a sip phone to a queue. I need retrieve that uui when the calls 
>rings in the sip phone logged in the queue.
>
>Any idea?
>
>Thank you

First: let's move this to asterisk-users, where it belongs.  This is 
not a development question, I believe.

Second: UUI is typically associated with PRI signalling, and is not 
normally a part of SIP messages, so your question is a bit confusing. 
Is there a SIP header that is labelled something like "UUI"  on the 
SIP device you are using?

Third: There were/are patches in Asterisk to read UUI data from Zap 
PRI trunks, but I have no idea if they have been 
temporarily/permanently disabled in the latest TRUNK.   Preliminary 
research finds this as the last relevant entry, but I haven't dug 
through the code (and I don't have the time to do a test right now...)

 
http://lists.digium.com/pipermail/asterisk-commits/2006-January/001366.html

JT